All MIBs › CISCO-MGX82XX-MODULE-RSRC-PART-MIB › cardLcnPartitionType
cardLcnPartitionType
Module: CISCO-MGX82XX-MODULE-RSRC-PART-MIB
OID (symbolic): CISCO-MGX82XX-MODULE-RSRC-PART-MIB::cardLcnPartitionType
OID (numeric): 1.3.6.1.4.1.351.110.2.9.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the type of partition on LCN:
The possible values are:
noPartition(1): all controllers compete for the totoal (G)LCNs limited by the card
controllerBased(2): the total number of (G)LCNs available to each controller is fixed but no reservation on each port. The number for each controller is specified in the cardResPartGrpTable.
portControllerBased(3): a certain number of (G)LCNs available on each port for each controller is reserved, it is specified in the port resouce partition table.
NOTE: This object has to be configured before adding any connections. Once a connection is added, this object cannot be changed until all of the connections are deleted.
What is cardLcnPartitionType?
A read-write setting that specifies how LCN (Logical Channel Number) resources on a card are partitioned among controllers, such as no partitioning (all controllers compete) or controller-based partitioning.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.2.9.1 snmpwalk -v2c -c public <target> CISCO-MGX82XX-MODULE-RSRC-PART-MIB::cardLcnPartitionType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.2.9.1.1 snmpget -v2c -c public <target> CISCO-MGX82XX-MODULE-RSRC-PART-MIB::cardLcnPartitionType.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.2.9.1.1 i <value>
Start monitoring Cisco MGX 8200/8800 series WAN switch (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-MODULE-RSRC-PART-MIB::cardLcnPartitionType OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200/8800 series WAN switch (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.2 | cardGeneric | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.2.9 | cardResourcePartition | CISCO-MGX82XX-MODULE-RSRC-PART-MIB |
| 1.3.6.1.4.1.351.110.2.9.1 | cardLcnPartitionType | CISCO-MGX82XX-MODULE-RSRC-PART-MIB |