All MIBs › CISCO-MGX82XX-DSX3-BERT-MIB › dsx3bertResourceStatus
dsx3bertResourceStatus
Module: CISCO-MGX82XX-DSX3-BERT-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertResourceStatus
OID (numeric): 1.3.6.1.4.1.351.110.6.2.2
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: All of bert resources can be used by only one user at a time. This object provides the status of the resources.
What is dsx3bertResourceStatus?
A read-only status object indicating whether the shared BERT (Bit Error Rate Test) resource is currently in use, since only one user can run a BERT test at a time.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.2 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertResourceStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.2.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertResourceStatus.1
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertResourceStatus OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6.2 | rasDsk | BASIS-RAS-DISK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.2 | dsx3bertResourceStatus | CISCO-MGX82XX-DSX3-BERT-MIB |