All MIBs › CISCO-MGX82XX-DSX3-BERT-MIB › dsx3bertControl
dsx3bertControl
Module: CISCO-MGX82XX-DSX3-BERT-MIB
OID (symbolic): CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertControl
OID (numeric): 1.3.6.1.4.1.351.110.6.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object controls all the SET operations on this MIB group. noAction : No action is taken. This value can not be written This object contains value noAction(0) just after setting it to delBert(6). acquireBert : Acquire BERT resources. cnfBert : Configure the required BERT test. startBert : The configured test has to be started. modBert : Modify parameters for the ongoing BERT test. delBert : Running BERT test has to be stopped. This value is write-only. This value is never returned for a SNMP Get request.
For Performing BERT : Following sequence need to be done. * acquire BERT by setting this object to acquireBert(1). * configure BERT by setting this object to cnfBert(3) * Start BERT by setting this object to startBert(4). * Modify BERT parameters by setting this object to modBert(5).
What is dsx3bertControl?
A read-write control object used to issue commands (such as acquiring or deleting BERT resources) for managing a Bit Error Rate Test on a DS3 interface; writing noAction has no effect and is the value seen after a delBert operation completes.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.1 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertControl
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.6.2.1.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertControl.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.6.2.1.1 i <value>
Start monitoring Cisco WAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX3-BERT-MIB::dsx3bertControl OID value, configure state conditions and alerts, and monitor any Cisco WAN switches from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6 | axisDiagnostics | BASIS-MIB |
| 1.3.6.1.4.1.351.110.6.2 | rasDsk | BASIS-RAS-DISK-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.6.2.1 | dsx3bertControl | CISCO-MGX82XX-DSX3-BERT-MIB |