All MIBs › CISCO-MGX82XX-DSX1-MIB › lineLength
lineLength
Module: CISCO-MGX82XX-DSX1-MIB
OID (symbolic): CISCO-MGX82XX-DSX1-MIB::lineLength
OID (numeric): 1.3.6.1.4.1.351.110.4.3.1.1.1.1.6
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This is not a standard RFC 1407 DS1 variable, it is specific to BASIS implementation. It specifies the line length: 1 - 0 to 110 ft (T1 line only) 2 - 110 to 220 ft (T1 line only) 3 - 220 to 330 ft (T1 line only) 4 - 330 to 440 ft (T1 line only) 5 - 440 to 550 ft (T1 line only) 6 - 550 to 660 ft (T1 line only) 7 - greater than 660 ft (T1 line only) 8 - 75 ohms (E1 line only (BNC)) 9 - 120 ohms (E1 line only (DB-15))
The default value for T1 is 1, for E1, if the connector type is DB15 then the default is 9, if BNC, it's 8. For FRSM-2CT3, the line length of DS1 has no meaning as there are no physical DS1 lines. So, for this card, the value is set to notRequired (16).
What is lineLength?
Configures the physical cable length of a T1 line in defined range bands (e.g., 0-110 ft, 110-220 ft, etc.), a vendor-specific setting affecting line equalization.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.1.1.1.6 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::lineLength
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.1.1.1.6.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::lineLength.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.351.110.4.3.1.1.1.1.6.1 i <value>
Start monitoring Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX1-MIB::lineLength OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3.1 | dsx1Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.1.1 | dsx1CnfGrp | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.1.1 | dsx1CnfGrpTable | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.1.1.1 | dsx1CnfGrpEntry | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.1.1.1.6 | lineLength | CISCO-MGX82XX-DSX1-MIB |