All MIBs › CISCO-MGX82XX-DSX1-MIB › lineAlarmState
lineAlarmState
Module: CISCO-MGX82XX-DSX1-MIB
OID (symbolic): CISCO-MGX82XX-DSX1-MIB::lineAlarmState
OID (numeric): 1.3.6.1.4.1.351.110.4.3.1.3.1.1.2
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This variable is a bitmap of the DSX1 Line Alarms.
A value of zero indicates no alarms.
Itemized below are the individual bits:
BitPosition Alarm
----------- -----
0 Receiving RAI
1 Transmitting RAI
2 Receiving AIS
3 Transmitting AIS
4 Receiving OOF
5 Receiving LOS
6 Near End Local Loopback in effect
7 Near End Remote Loopback in effect
8 Near End Remote Payload Loopback
9 Receiving CRC MF OOF (E1)
10 Receiving Sig MF OOF (E1)
11 Receiving MF RAI (E1)
12 Receiving MF AIS (E1)
13 BERT in effect
14 Far End Remote Loopback in effect
15 Detected Near End Remote Loopback in
effectWhat is lineAlarmState?
Reports a bitmap of currently active DSX1 line alarm conditions (such as receiving or transmitting Remote Alarm Indication), where a value of zero means no alarms are present.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.3.1.1.2 snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::lineAlarmState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.3.1.1.2.1 snmpget -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::lineAlarmState.1
Start monitoring Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX1-MIB::lineAlarmState OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) from a single console.
OID Breakdown
Upper-level ancestors (11 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.351 | stratacom | CISCOWAN-SMI |
| 1.3.6.1.4.1.351.110 | basis | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4 | basisLines | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3 | dsx1 | BASIS-MIB |
| 1.3.6.1.4.1.351.110.4.3.1 | dsx1Line | BASIS-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.351.110.4.3.1.3 | dsx1AlmGrp | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.3.1 | dsx1AlmGrpTable | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.3.1.1 | dsx1AlmGrpEntry | CISCO-MGX82XX-DSX1-MIB |
| 1.3.6.1.4.1.351.110.4.3.1.3.1.1.2 | lineAlarmState | CISCO-MGX82XX-DSX1-MIB |