All MIBs › CISCO-MGX82XX-DSX1-MIB › cRCCurrent

cRCCurrent

Module: CISCO-MGX82XX-DSX1-MIB

OID (symbolic): CISCO-MGX82XX-DSX1-MIB::cRCCurrent

OID (numeric): 1.3.6.1.4.1.351.110.4.3.1.3.1.1.13

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: This counter counts the number of P Bit code violations encountered by the interface.

What is cRCCurrent?

Reports the current running count of P-bit code violations (CRC errors) detected on the DS1 interface.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.3.1.1.13
snmpwalk -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::cRCCurrent

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.351.110.4.3.1.3.1.1.13.1
snmpget -v2c -c public <target> CISCO-MGX82XX-DSX1-MIB::cRCCurrent.1

Start monitoring Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-MGX82XX-DSX1-MIB::cRCCurrent OID value, configure state conditions and alerts, and monitor any Cisco MGX 8200 series WAN switch (T1/E1 service modules, legacy) from a single console.

OID Breakdown

Upper-level ancestors (11 from the standard OID tree / other modules)

Numeric OID	Name	Module
1	iso	LANART-AGENT
1.3	org	AirPair-MIB
1.3.6	dod	AirPair-MIB
1.3.6.1	internet	AirPair-MIB
1.3.6.1.4	private	AirPair-MIB
1.3.6.1.4.1	enterprises	AirPair-MIB
1.3.6.1.4.1.351	stratacom	CISCOWAN-SMI
1.3.6.1.4.1.351.110	basis	BASIS-MIB
1.3.6.1.4.1.351.110.4	basisLines	BASIS-MIB
1.3.6.1.4.1.351.110.4.3	dsx1	BASIS-MIB
1.3.6.1.4.1.351.110.4.3.1	dsx1Line	BASIS-MIB

Numeric OID	Name	Module
1.3.6.1.4.1.351.110.4.3.1.3	dsx1AlmGrp	CISCO-MGX82XX-DSX1-MIB
1.3.6.1.4.1.351.110.4.3.1.3.1	dsx1AlmGrpTable	CISCO-MGX82XX-DSX1-MIB
1.3.6.1.4.1.351.110.4.3.1.3.1.1	dsx1AlmGrpEntry	CISCO-MGX82XX-DSX1-MIB
1.3.6.1.4.1.351.110.4.3.1.3.1.1.13	cRCCurrent	CISCO-MGX82XX-DSX1-MIB

CISCO-MGX82XX-DSX1-MIB :: cRCCurrent

cRCCurrent

Module

This MIB depends on