All MIBs › CISCO-LWAPP-SYS-MIB › clsTransferStatus
clsTransferStatus
Module: CISCO-LWAPP-SYS-MIB
OID (symbolic): CISCO-LWAPP-SYS-MIB::clsTransferStatus
OID (numeric): 1.3.6.1.4.1.9.9.618.1.1.8.1.1.13
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the current status of a file transfer operation. The following are valid only when clsTransferType is 'download' :- bootBreakOff(14), invalidTarFile(15). A value of unknown(1) indicates that, unknown state of transfer. A value of notInitiated(2) indicates that, no transfer operation has been initiated A value of transferStarting(3) indicates that, transfer operation has commenced. A value of errorStarting(4) indicates that, error while starting transfer operation. A value of wrongFileType(5) indicates that, wrong file type specified. A value of updatingConfig(6) indicates that, updating configuration. A value of invalidConfigFile(7) indicates that, invalid config file specified. A value of writingToFlash(8) indicates that, writing to flash A value of failureWritingToFlash(9) indicates that, writing to flash failed. A value of checkingCRC(10) indicates that, checking cyclic redundancy check. A value of failedCRC(11) indicates that, CRC check failed. A value of unknownDirection(12) indicates that, unknown direction of transfer. A value of transferSuccessful(13) indicates that, transfer operation succeeded. A value of transferFailed(14) indicates that, transfer failed. A value of bootBreakOff(15) indicates that, Boot break off. A value of invalidTarFile(16) indicates that, invalid Tar file.
What is clsTransferStatus?
A read-only object reporting the current state of an in-progress or completed file transfer operation, such as unknown, in-progress, failed, or (for downloads) conditions like a boot break-off or invalid tar file.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.8.1.1.13 snmpwalk -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsTransferStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.8.1.1.13.1 snmpget -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsTransferStatus.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-SYS-MIB::clsTransferStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1 | ciscoLwappSysMIBObjects | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1 | clsConfig | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.8 | clsTransferConfig | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.8.1 | clsTransferConfigTable | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.8.1.1 | clsTransferConfigEntry | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.8.1.1.13 | clsTransferStatus | CISCO-LWAPP-SYS-MIB |