All MIBs › CISCO-LWAPP-SYS-MIB › clsPortModePhysicalStatus
clsPortModePhysicalStatus
Module: CISCO-LWAPP-SYS-MIB
OID (symbolic): CISCO-LWAPP-SYS-MIB::clsPortModePhysicalStatus
OID (numeric): 1.3.6.1.4.1.9.9.618.1.1.14.1.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object represents the switch port's current physical speed status. A value of unknown indicates that, the speed of the port is not known A value of autoNegotiate indicates that, port senses speed and negotiates with the port at the other end of the link for data transfer operation A value of half10 indicates that, port operates at 10mbps half duplex speed. A value of full10 indicates that, port operates at 10mbps full duplex speed. A value of half100 indicates that, port operates at 100mbps half duplex speed. A value of full100 indicates that, port operates at 100mbps full duplex speed A value of full1000sx indicates that, port operates at 1000mbps full duplex speed over multi mode fiber. A value of half1000 indicates that, port operates at 1000mbps half duplex speed. A value of full1000 indicates that, port operates at 1000mbps full duplex speed. A value of half2500 indicates that, port operates at 2500mbps half duplex speed. A value of full2500 indicates that, port operates at 2500mbps full duplex speed. A value of half5000 indicates that, port operates at 5000mbps half duplex speed. A value of full5000 indicates that, port operates at 5000mbps full duplex speed. A value of half10000 indicates that, port operates at 10000mbps half duplex speed. A value of full10000 indicates that, port operates at 10000mbps full duplex speed.
What is clsPortModePhysicalStatus?
Reports the current negotiated physical speed/duplex status of a switch port, such as auto-negotiate, a fixed speed, or unknown.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.14.1.1.3 snmpwalk -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsPortModePhysicalStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.14.1.1.3.1 snmpget -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsPortModePhysicalStatus.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-SYS-MIB::clsPortModePhysicalStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1 | ciscoLwappSysMIBObjects | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1 | clsConfig | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.14 | cLSPortModeConfig | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.14.1 | clsPortModeConfigTable | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.14.1.1 | clsPortModeConfigEntry | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.14.1.1.3 | clsPortModePhysicalStatus | CISCO-LWAPP-SYS-MIB |