All MIBs › CISCO-LWAPP-SYS-MIB › clsEmergencyImageVersion
clsEmergencyImageVersion
Module: CISCO-LWAPP-SYS-MIB
OID (symbolic): CISCO-LWAPP-SYS-MIB::clsEmergencyImageVersion
OID (numeric): 1.3.6.1.4.1.9.9.618.1.3.1
Node type: OBJECT-TYPE
Type: SnmpAdminString
Access: read-only
Description: This object represents Cisco recommends installing Cisco Unified Wireless Network Controller Boot Software , (*_ER.aes , where star denotes the version of the controller image ) on all controller platforms. If this ER.aes is not installed, the controller would not be able to show the Emergency Image Version correctly(or Field Recovery Image Version), and would be shown as 'N/A'. The ER.aes files are independent from the controller software files. Any controller software file can be run with any ER.aes file. However, installing the latest boot software file (*_ER.aes , where star denotes the controller version) ensures that the boot software modifications in all of the previous and current boot software ER.aes files are installed.
What is clsEmergencyImageVersion?
Reports the version of the Cisco emergency/recovery boot software (ER.aes) image installed on the wireless controller, which is needed for the controller to recover from certain failures.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.3.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsEmergencyImageVersion
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.3.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsEmergencyImageVersion.1
SNMPv3 example:
snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> clsEmergencyImageVersion.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-SYS-MIB::clsEmergencyImageVersion OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1 | ciscoLwappSysMIBObjects | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.3 | clsImageInfo | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.3.1 | clsEmergencyImageVersion | CISCO-LWAPP-SYS-MIB |