All MIBs › CISCO-LWAPP-SYS-MIB › clsAlarmHoldTime
clsAlarmHoldTime
Module: CISCO-LWAPP-SYS-MIB
OID (symbolic): CISCO-LWAPP-SYS-MIB::clsAlarmHoldTime
OID (numeric): 1.3.6.1.4.1.9.9.618.1.1.19.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: This object specifies the time in seconds for which an alarm object should be soaked when its on/off state is changed.
What is clsAlarmHoldTime?
Read-write value (seconds) specifying how long an alarm's changed on/off state is held (debounced) before being reported.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.19.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsAlarmHoldTime
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.618.1.1.19.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-SYS-MIB::clsAlarmHoldTime.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.618.1.1.19.1.1 i <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-SYS-MIB::clsAlarmHoldTime OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.618 | ciscoLwappSysMIB | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1 | ciscoLwappSysMIBObjects | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1 | clsConfig | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.19 | clsAlarmObjects | CISCO-LWAPP-SYS-MIB |
| 1.3.6.1.4.1.9.9.618.1.1.19.1 | clsAlarmHoldTime | CISCO-LWAPP-SYS-MIB |