CISCO-LWAPP-MFP-MIB :: ciscoLwappMfpValidationConfigMismatch

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-LWAPP-MFP-MIB › ciscoLwappMfpValidationConfigMismatch

ciscoLwappMfpValidationConfigMismatch

Module: CISCO-LWAPP-MFP-MIB

OID (symbolic): CISCO-LWAPP-MFP-MIB::ciscoLwappMfpValidationConfigMismatch

OID (numeric): 1.3.6.1.4.1.9.9.518.0.2

Node type: NOTIFICATION-TYPE

Description: This notification is sent by the agent when the controller detects that the AP couldn't configure itself with the MFP signature validation configuration. The controller detects the mismatch by matching the MFP configuration requested to be applied with the configuration returned in the acknowledgement as having been configured by the AP. The controller also generates this notification to indicate that configuration mismatch is cleared when the values of cLMfpApMfpValidationEnable and cLMfpApMfpValidationActual are found to be the same.

This notification is generated by the controller only if MFP has been configured as the protection mechanism through cLMfpProtectType.

Examples

Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):

snmptrap -v2c -c public <manager> '' CISCO-LWAPP-MFP-MIB::ciscoLwappMfpValidationConfigMismatch
snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.518.0.2

Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):

snmptrapd -f -Lo -c /dev/null authCommunity log public

Example snmptrapd log entry:

zoo11-linux.zoo [UDP: [192.168.30.111]:55328->[192.168.30.10]:162]:
  DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (302528544) 35 days, 0:21:25.44
  SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-LWAPP-MFP-MIB::ciscoLwappMfpValidationConfigMismatch

Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MFP-MIB::ciscoLwappMfpValidationConfigMismatch OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.518ciscoLwappMfpMIBCISCO-LWAPP-MFP-MIB
1.3.6.1.4.1.9.9.518.0ciscoLwappMfpMIBNotifsCISCO-LWAPP-MFP-MIB
1.3.6.1.4.1.9.9.518.0.2ciscoLwappMfpValidationConfigMismatchCISCO-LWAPP-MFP-MIB