All MIBs › CISCO-LWAPP-MFP-MIB › ciscoLwappMfpProtectConfigMismatch
ciscoLwappMfpProtectConfigMismatch
Module: CISCO-LWAPP-MFP-MIB
OID (symbolic): CISCO-LWAPP-MFP-MIB::ciscoLwappMfpProtectConfigMismatch
OID (numeric): 1.3.6.1.4.1.9.9.518.0.1
Node type: NOTIFICATION-TYPE
Description: This notification is sent by the agent when the controller detects that the AP couldn't apply the protection configuration to the specific radio interface for the specified WLAN. The controller detects the mismatch by matching the MFP configuration requested to be applied with the configuration returned in the acknowledgement as having been applied to the radio interface. The controller also generates this notification to indicate that configuration mismatch is cleared when the values of cLMfpProtectionEnable and cLMfpApIfMfpProtectionActual are found to be the same.
This notification is generated by the controller only if MFP has been configured as the protection mechanism through cLMfpProtectType.
Examples
Send this trap to an SNMP manager — replace <manager> with the IP or hostname of your monitoring server (SNMPv2c):
snmptrap -v2c -c public <manager> '' CISCO-LWAPP-MFP-MIB::ciscoLwappMfpProtectConfigMismatch snmptrap -v2c -c public <manager> '' 1.3.6.1.4.1.9.9.518.0.1
Listen for incoming traps on the manager host (-f keeps it in the foreground, -Lo prints to stdout — useful for testing):
snmptrapd -f -Lo -c /dev/null authCommunity log public
Example snmptrapd log entry:
zoo11-linux.zoo [UDP: [192.168.30.111]:51610->[192.168.30.10]:162]: DISMAN-EVENT-MIB::sysUpTimeInstance = Timeticks: (51597210) 5 days, 23:19:32.10 SNMPv2-MIB::snmpTrapOID.0 = OID: CISCO-LWAPP-MFP-MIB::ciscoLwappMfpProtectConfigMismatch
SNMPv3 example:
snmptrap -v3 -l authPriv -u snmpv3user -a SHA -A "AuthPass1" -x AES -X "PrivPass1" <manager> '' CISCO-LWAPP-MFP-MIB::ciscoLwappMfpProtectConfigMismatch
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MFP-MIB::ciscoLwappMfpProtectConfigMismatch OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.0 | ciscoLwappMfpMIBNotifs | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.0.1 | ciscoLwappMfpProtectConfigMismatch | CISCO-LWAPP-MFP-MIB |