All MIBs › CISCO-LWAPP-MFP-MIB › cLMfpApMfpValidationEnable
cLMfpApMfpValidationEnable
Module: CISCO-LWAPP-MFP-MIB
OID (symbolic): CISCO-LWAPP-MFP-MIB::cLMfpApMfpValidationEnable
OID (numeric): 1.3.6.1.4.1.9.9.518.2.2.2.1.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object specifies whether the AP should validate the management frames received by it in accordance with the MFP version or not.
A value of 'true' indicates that the AP should validate all the received management frames accordance with the MFP version supported by the respective dot11 interface on which the frame was received.
A value of 'false' indicates that the AP won't validate the received management frames.
MFP validation is enabled or disabled on an AP through the values of 'true' and 'false' only if MFP is configured as the protection mechanism by setting the object cLMfpProtectType to 'cLMfpProtectMfp'. The NMS shall modify the value of this object, but the change made will take effect only if MFP is configured as the protection mechanism on the controller through the cLMfpProtectType object.
SET is no more supported for this object.
What is cLMfpApMfpValidationEnable?
Read-write setting instructing an access point whether to validate received management frames according to the supported MFP version.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.518.2.2.2.1.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-MFP-MIB::cLMfpApMfpValidationEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.518.2.2.2.1.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-MFP-MIB::cLMfpApMfpValidationEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.518.2.2.2.1.1.1 s <value>
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-MFP-MIB::cLMfpApMfpValidationEnable OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.518 | ciscoLwappMfpMIB | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.2 | ciscoLwappMfpMIBObjects | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.2.2 | ciscoLwappMfpStatus | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.2.2.2 | cLMfpApParamTable | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.2.2.2.1 | cLMfpApParamEntry | CISCO-LWAPP-MFP-MIB |
| 1.3.6.1.4.1.9.9.518.2.2.2.1.1 | cLMfpApMfpValidationEnable | CISCO-LWAPP-MFP-MIB |