All MIBs › CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB › cldccDiagAssociationTestRespIsAssocComplete
cldccDiagAssociationTestRespIsAssocComplete
Module: CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestRespIsAssocComplete
OID (numeric): 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-only
Description: Value of this field shall be 1 if the 802.11 association concluded normally,0 otherwise.
What is cldccDiagAssociationTestRespIsAssocComplete?
This TruthValue reports whether a diagnostic 802.11 association test initiated against a wireless client concluded normally (1/true) or not (0/false). A wireless admin cares because this is the pass/fail result of an active client diagnostic test run through the LWAPP/CCX framework, telling them whether the client actually completed association during the test rather than stalling partway through. For example, a client failing repeated connectivity complaints might show this object as false, confirming the client genuinely cannot complete 802.11 association rather than just experiencing slow roaming.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestRespIsAssocComplete
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestRespIsAssocComplete.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssociationTestRespIsAssocComplete OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.3 | ciscoLwappDot11ClientCcxMIBObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.599.3.2 | ciscoLwappDot11CcxClientDiagMIB | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0 | ciscoLwappDot11CcxClientDiagMIBObjects | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2 | ciscoClientCcxDiagResponse | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4 | cldccDiagAssociationTestRespTable | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4 | cldccDiagAssociationTestRespEntry | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.1 | cldccDiagAssociationTestRespIsAssocComplete | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |