All MIBs › CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB › cldccDiagAssocTestRespReturnedStatus
cldccDiagAssocTestRespReturnedStatus
Module: CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB
OID (symbolic): CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssocTestRespReturnedStatus
OID (numeric): 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: Value of this field shall be the value returned in the final 802.11 association response frame during the test.
What is cldccDiagAssocTestRespReturnedStatus?
This Unsigned32 value is the raw status code returned in the final 802.11 association response frame captured during a diagnostic association test against a client. An admin cares because this is the actual 802.11 status code (as defined by the 802.11 standard, e.g., success, capability mismatch, or other rejection reasons) rather than a summarized pass/fail, giving the specific reason an association test failed. For example, a nonzero status code here corresponding to 'unsupported rate' would tell the admin the test client and AP disagreed on supported data rates rather than a generic association failure.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2 snmpwalk -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssocTestRespReturnedStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2.1 snmpget -v2c -c public <target> CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssocTestRespReturnedStatus.1
Start monitoring Cisco Wireless LAN Controllers (LWAPP-based) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB::cldccDiagAssocTestRespReturnedStatus OID value, configure state conditions and alerts, and monitor any Cisco Wireless LAN Controllers (LWAPP-based) from a single console.
OID Breakdown
Upper-level ancestors (10 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| 1.3.6.1.4.1.9.9.599 | ciscoLwappDot11ClientMIB | CISCO-LWAPP-DOT11-CLIENT-MIB |
| 1.3.6.1.4.1.9.9.599.3 | ciscoLwappDot11ClientCcxMIBObjects | CISCO-LWAPP-DOT11-CLIENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.599.3.2 | ciscoLwappDot11CcxClientDiagMIB | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0 | ciscoLwappDot11CcxClientDiagMIBObjects | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2 | ciscoClientCcxDiagResponse | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4 | cldccDiagAssociationTestRespTable | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4 | cldccDiagAssociationTestRespEntry | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |
| 1.3.6.1.4.1.9.9.599.3.2.0.2.4.4.2 | cldccDiagAssocTestRespReturnedStatus | CISCO-LWAPP-DOT11-CCX-CLIENT-DIAG-MIB |