CISCO-ITP-GSP-MIB :: cgspLinkReason

MIB Reference — IPNetwork Monitor

All MIBsCISCO-ITP-GSP-MIBcgspLinkReason

cgspLinkReason

Module: CISCO-ITP-GSP-MIB

OID (symbolic): CISCO-ITP-GSP-MIB::cgspLinkReason

OID (numeric): 1.3.6.1.4.1.9.9.336.1.6.1.1.4

Node type: OBJECT-TYPE

Type: INTEGER

Access: read-only

Description:

This object provides additional information on the source of a link failure. This object will contain the last reason that caused the link to fail. 'unknown' : Link has failed do to an undetermined cause. 'changeOverInProgress' : Change over in progress. 'mgmtDisconnectRequest' : Management disconnect request. 'linkAlignmentLost' : Link alignment lost. 'connectionLost' : Link connection lost. 'localDisconnect' : Local Disconnect. 'remoteDisconnect' : Remote Disconnect. 'suermFailure' : Signal unit error rate monitor failure. 't1Timeout' : T1 timeout no FISU received. 't2Timeout' : T2 timeout no SIO received. 't3Timeout' : T3 timeout no SIN received. 't6Timeout' : T6 timeout excessive congestion. 't7Timeout' : T7 timeout excessive acknowledgement delay. 'provingFailure' : Link proving failure. 'protocolError-BSN' : Abnormal BSN received. 'protocolError-FIB' : Abnormal FIB received. 'protocolError-SIN' : Abnormal SIB received. 'protocolError-LSSU' : Abnormal LSSU received. 'peerNotReady' : Peer not ready. 'communicationLost' : Communication lost. 'noListenPosted' : No Listen posted. 'bufferNotAvailable' : Unable to allocate buffer. 'cardRemoved' : Link card removed. 'cardInserted' : Link card Inserted. 'falseLinkCongestion' : false link congestion. 'configDownload' : Configuration downloading. 'localInhibit' : Local request to inhibit link. 'localUninhibit' : Local request to uninhibit link. 'remoteInhibit' : Remote request to inhibit link. 'remoteUninhibit': Local request to uninhibit link. 'localBlocked' : Local Processor outage. 'localUnBlocked' : Local Processor recovery. 'remoteBlocked' : Remote Processor outage. 'remoteUnblocked': Remote Processor recovery. 'linkRestored' : Link restored. 'linkTestFailure': Signalling Link Test failure.'

What is cgspLinkReason?

This object provides the reason why a signaling link in the SS7 (Signaling System 7) telephony network changed state. Reasons include protocol errors, configuration issues, or administrative actions. Telecom operators monitor this to diagnose call processing failures and understand signaling network stability.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.336.1.6.1.1.4
snmpwalk -v2c -c public <target> CISCO-ITP-GSP-MIB::cgspLinkReason

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.336.1.6.1.1.4.1
snmpget -v2c -c public <target> CISCO-ITP-GSP-MIB::cgspLinkReason.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.336ciscoGspMIBCISCO-ITP-GSP-MIB
1.3.6.1.4.1.9.9.336.1ciscoGspMIBObjectsCISCO-ITP-GSP-MIB
1.3.6.1.4.1.9.9.336.1.6cgspLinkCISCO-ITP-GSP-MIB
1.3.6.1.4.1.9.9.336.1.6.1cgspLinkTableCISCO-ITP-GSP-MIB
1.3.6.1.4.1.9.9.336.1.6.1.1cgspLinkTableEntryCISCO-ITP-GSP-MIB
1.3.6.1.4.1.9.9.336.1.6.1.1.4cgspLinkReasonCISCO-ITP-GSP-MIB