All MIBs › CISCO-ISCSI-GW-MIB › fc2IscsiNodeRevertToPrimaryPort
fc2IscsiNodeRevertToPrimaryPort
Module: CISCO-ISCSI-GW-MIB
OID (symbolic): CISCO-ISCSI-GW-MIB::fc2IscsiNodeRevertToPrimaryPort
OID (numeric): 1.3.6.1.4.1.9.9.317.1.1.4.1.10
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-create
Description: This object indicates if it is required to revert back to primary port the FC target if it comes back online.
Every iSCSI target represent one or more port(s) on the FC target (fc2IscsiPortFCAddrListIndex). Only one of the ports is the primary port. If the primary port goes down, the designated secondary port takes over. This objects indicates if the primary port has to be used used once it comes back up.
Note that this object is valid only if fc2IscsiNodeRole is 'targetTypeNode'.
What is fc2IscsiNodeRevertToPrimaryPort?
Indicates whether the gateway should automatically revert traffic back to the primary FC target port once that port comes back online.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.317 | ciscoIscsiGwMIB | CISCO-ISCSI-GW-MIB |
| 1.3.6.1.4.1.9.9.317.1 | ciscoiScsiGwMIBObjects | CISCO-ISCSI-GW-MIB |
| 1.3.6.1.4.1.9.9.317.1.1 | ciScsiConfig | CISCO-ISCSI-GW-MIB |
| 1.3.6.1.4.1.9.9.317.1.1.4 | fc2IscsiNodeTable | CISCO-ISCSI-GW-MIB |
| 1.3.6.1.4.1.9.9.317.1.1.4.1 | fc2IscsiNodeEntry | CISCO-ISCSI-GW-MIB |
| 1.3.6.1.4.1.9.9.317.1.1.4.1.10 | fc2IscsiNodeRevertToPrimaryPort | CISCO-ISCSI-GW-MIB |