All MIBs › CISCO-IP-NW-DISCOVERY-MIB › cIpNetworkDiscoveryCmdStatus
cIpNetworkDiscoveryCmdStatus
Module: CISCO-IP-NW-DISCOVERY-MIB
OID (symbolic): CISCO-IP-NW-DISCOVERY-MIB::cIpNetworkDiscoveryCmdStatus
OID (numeric): 1.3.6.1.4.1.9.9.434.1.1.11
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: The status of the last IP network discovery command operation.
success (1) - IP network discovery operation completed successfully.
none (2) - no IP network discovery operation is performed.
inProgress (3) - discovery operation is in progress.
noGigEInterfaceIndexSpecified (4) - 'ifIndex' of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigEInterfaceToDiscover' object is set to '0'. noGigEInetAddrSpecified (5) - InetAddress of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkpGigEInetAddrToDiscover' object is set to '0'. noGigESwitchWWNSpecified (6) - The Switch WWN of the gigabit eithernet interface is not specified, i.e., the value of 'cIpNetworkGigESwitchWWNToDiscover' object is set to '0'. invalidGigEInterfaceIndex (7) - 'ifIndex' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInterfaceToDiscover' object is not valid.
invalidGigEInetAddrType (8) - 'InetAddrType' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddrType' object is not valid.
invalidGigEInetAddr (9) - 'InetAddr' of the gigabit ethernet interface specified in the 'cIpNetworkGigEInetAddr' object is not valid.
generalFailure (10)- General IP network discovery operation Failure.
What is cIpNetworkDiscoveryCmdStatus?
Reports the outcome of the most recent IP network discovery command, such as success, none run, or currently in progress.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.1.11 snmpwalk -v2c -c public <target> CISCO-IP-NW-DISCOVERY-MIB::cIpNetworkDiscoveryCmdStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.434.1.1.11.1 snmpget -v2c -c public <target> CISCO-IP-NW-DISCOVERY-MIB::cIpNetworkDiscoveryCmdStatus.1
Start monitoring Cisco MDS/storage fabric switches with FCIP interfaces with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IP-NW-DISCOVERY-MIB::cIpNetworkDiscoveryCmdStatus OID value, configure state conditions and alerts, and monitor any Cisco MDS/storage fabric switches with FCIP interfaces from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.434 | ciscoIpNetworkDiscoveryMIB | CISCO-IP-NW-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.434.1 | cIpNetworkDiscoveryMIBObjs | CISCO-IP-NW-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.434.1.1 | cIpNetworkDiscoveryConfig | CISCO-IP-NW-DISCOVERY-MIB |
| 1.3.6.1.4.1.9.9.434.1.1.11 | cIpNetworkDiscoveryCmdStatus | CISCO-IP-NW-DISCOVERY-MIB |