All MIBs › CISCO-IETF-PIM-MIB › cPimJoinPruneInterval
cPimJoinPruneInterval
Module: CISCO-IETF-PIM-MIB
OID (symbolic): CISCO-IETF-PIM-MIB::cPimJoinPruneInterval
OID (numeric): 1.3.6.1.4.1.9.10.119.1.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-write
Description: The default interval at which periodic PIM-SM Join/Prune messages are to be sent.
What is cPimJoinPruneInterval?
A read-write setting for the default interval at which the router periodically sends PIM Sparse-Mode Join/Prune messages.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.119.1.1.1 snmpwalk -v2c -c public <target> CISCO-IETF-PIM-MIB::cPimJoinPruneInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.119.1.1.1.1 snmpget -v2c -c public <target> CISCO-IETF-PIM-MIB::cPimJoinPruneInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.119.1.1.1.1 i <value>
Start monitoring Cisco router performing IP multicast routing (PIM) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-PIM-MIB::cPimJoinPruneInterval OID value, configure state conditions and alerts, and monitor any Cisco router performing IP multicast routing (PIM) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.119 | ciscoIetfPimMIB | CISCO-IETF-PIM-MIB |
| 1.3.6.1.4.1.9.10.119.1 | cPimMIBObjects | CISCO-IETF-PIM-MIB |
| 1.3.6.1.4.1.9.10.119.1.1 | cPim | CISCO-IETF-PIM-MIB |
| 1.3.6.1.4.1.9.10.119.1.1.1 | cPimJoinPruneInterval | CISCO-IETF-PIM-MIB |