CISCO-IETF-MPLS-TE-P2MP-STD-MIB :: cmplsTeP2mpTunnelSubGroupIDNext

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IETF-MPLS-TE-P2MP-STD-MIB › cmplsTeP2mpTunnelSubGroupIDNext

cmplsTeP2mpTunnelSubGroupIDNext

Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB

OID (symbolic): CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelSubGroupIDNext

OID (numeric): 1.3.6.1.4.1.9.10.142.2.2

Node type: OBJECT-TYPE

Type: IndexIntegerNextFree

Access: read-only

Description: This object contains an unused value for cmplsTeP2mpTunnelDestSubGroupID, or a zero to indicate that none exists. Negative values are not allowed, as they do not correspond to valid values of cmplsTeP2mpTunnelDestSubGroupID.

Note that this object offers an unused value for an cmplsTeP2mpTunnelDestSubGroupID value at the local LSR when it is a sub-group originator. In other cases, the value of cmplsTeP2mpTunnelDestSubGroupID SHOULD be taken from the received value signaled by the signaling protocol and corresponds to the value in cmplsTeP2mpTunnelDestSrcSubGroupID.

What is cmplsTeP2mpTunnelSubGroupIDNext?

Reports an available (unused) value that can be assigned as the next destination sub-group ID for this tunnel, or zero if none remain.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.2
snmpwalk -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelSubGroupIDNext

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.2.1
snmpget -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelSubGroupIDNext.1

Start monitoring Cisco MPLS provider-edge/core routers (P2MP TE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelSubGroupIDNext OID value, configure state conditions and alerts, and monitor any Cisco MPLS provider-edge/core routers (P2MP TE) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.142cmplsTeP2mpStdMIBCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2cmplsTeP2mpObjectsCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.2cmplsTeP2mpTunnelSubGroupIDNextCISCO-IETF-MPLS-TE-P2MP-STD-MIB