CISCO-IETF-MPLS-TE-P2MP-STD-MIB :: cmplsTeP2mpTunnelDestBranchOutSegment

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IETF-MPLS-TE-P2MP-STD-MIB › cmplsTeP2mpTunnelDestBranchOutSegment

cmplsTeP2mpTunnelDestBranchOutSegment

Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB

OID (symbolic): CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelDestBranchOutSegment

OID (numeric): 1.3.6.1.4.1.9.10.142.2.3.1.9

Node type: OBJECT-TYPE

Type: MplsIndexType

Access: read-only

Description: This object identifies the outgoing branch from this LSR towards the destination represented by this table entry. It must be a unique identifier within the scope of this tunnel.

If MPLS-LSR-STD-MIB is implemented, this object should contain an index into mplsOutSegmentTable.

If MPLS-LSR-STD-MIB is not implemented, the LSR should assign a unique value to each branch of the tunnel.

The value of this object is also used as an index into cmplsTeP2mpTunnelBranchPerfTable.

What is cmplsTeP2mpTunnelDestBranchOutSegment?

Identifies the outgoing branch segment from this LSR toward a specific destination of the P2MP tunnel, typically referencing an entry in the MPLS-LSR-STD-MIB out-segment table.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.3.1.9
snmpwalk -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelDestBranchOutSegment

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.3.1.9.1
snmpget -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelDestBranchOutSegment.1

Start monitoring Cisco MPLS provider-edge/core routers (P2MP TE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelDestBranchOutSegment OID value, configure state conditions and alerts, and monitor any Cisco MPLS provider-edge/core routers (P2MP TE) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.142cmplsTeP2mpStdMIBCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2cmplsTeP2mpObjectsCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.3cmplsTeP2mpTunnelDestTableCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.3.1cmplsTeP2mpTunnelDestEntryCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.3.1.9cmplsTeP2mpTunnelDestBranchOutSegmentCISCO-IETF-MPLS-TE-P2MP-STD-MIB