All MIBs › CISCO-IETF-MPLS-TE-P2MP-STD-MIB › cmplsTeP2mpTunnelConfigured
cmplsTeP2mpTunnelConfigured
Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB
OID (symbolic): CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelConfigured
OID (numeric): 1.3.6.1.4.1.9.10.142.1.1
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The number of P2MP tunnels configured on this device. A tunnel is considered configured if the mplsTunnelRowStatus in MPLS-TE-STD-MIB is active(1).
What is cmplsTeP2mpTunnelConfigured?
This read-only object reports the total number of point-to-multipoint (P2MP) MPLS-TE tunnels configured (i.e. in active RowStatus) on the device.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.142.1.1 snmpwalk -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelConfigured
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.142.1.1.1 snmpget -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelConfigured.1
Start monitoring Cisco MPLS provider-edge/core routers (P2MP TE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelConfigured OID value, configure state conditions and alerts, and monitor any Cisco MPLS provider-edge/core routers (P2MP TE) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.142 | cmplsTeP2mpStdMIB | CISCO-IETF-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.9.10.142.1 | cmplsTeP2mpScalars | CISCO-IETF-MPLS-TE-P2MP-STD-MIB |
| 1.3.6.1.4.1.9.10.142.1.1 | cmplsTeP2mpTunnelConfigured | CISCO-IETF-MPLS-TE-P2MP-STD-MIB |