CISCO-IETF-MPLS-TE-P2MP-STD-MIB :: cmplsTeP2mpTunnelBranchInIfIndex

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IETF-MPLS-TE-P2MP-STD-MIB › cmplsTeP2mpTunnelBranchInIfIndex

cmplsTeP2mpTunnelBranchInIfIndex

Module: CISCO-IETF-MPLS-TE-P2MP-STD-MIB

OID (symbolic): CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex

OID (numeric): 1.3.6.1.4.1.9.10.142.2.4.1.12

Node type: OBJECT-TYPE

Type: InterfaceIndexOrZero

Access: read-only

Description: This is the index of incoming TE link physical I/F for the P2MP ingress tunnel branch. It is non-zero when the P2MP tunnel's incoming branch has been signaled and it is applicable only on mid point routers for tunnels having out-segment up and running. This object is not part of the original draft

What is cmplsTeP2mpTunnelBranchInIfIndex?

Read-only index identifying the incoming physical TE interface for a P2MP ingress tunnel branch, applicable on midpoint routers where the branch's outgoing segment is up and signaled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.4.1.12
snmpwalk -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.142.2.4.1.12.1
snmpget -v2c -c public <target> CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex.1

Start monitoring Cisco MPLS provider-edge/core routers (P2MP TE) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-MPLS-TE-P2MP-STD-MIB::cmplsTeP2mpTunnelBranchInIfIndex OID value, configure state conditions and alerts, and monitor any Cisco MPLS provider-edge/core routers (P2MP TE) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.142cmplsTeP2mpStdMIBCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2cmplsTeP2mpObjectsCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.4cmplsTeP2mpTunnelBranchPerfTableCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.4.1cmplsTeP2mpTunnelBranchPerfEntryCISCO-IETF-MPLS-TE-P2MP-STD-MIB
1.3.6.1.4.1.9.10.142.2.4.1.12cmplsTeP2mpTunnelBranchInIfIndexCISCO-IETF-MPLS-TE-P2MP-STD-MIB