CISCO-IETF-MPLS-ID-STD-03-MIB :: cmplsNodeId

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-IETF-MPLS-ID-STD-03-MIB › cmplsNodeId

cmplsNodeId

Module: CISCO-IETF-MPLS-ID-STD-03-MIB

OID (symbolic): CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsNodeId

OID (numeric): 1.3.6.1.4.1.9.10.147.1.3

Node type: OBJECT-TYPE

Type: CMplsNodeId

Access: read-write

Description: This object allows the operator or service provider to assign a unique MPLS-TP Node_ID.

The Node_ID is assigned within the scope of the Global_ID.

What is cmplsNodeId?

This read-write object lets an operator assign a unique MPLS-TP Node_ID to the device, scoped within the associated Global_ID, for identifying the node in an MPLS-TP network.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.147.1.3
snmpwalk -v2c -c public <target> CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsNodeId

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.147.1.3.1
snmpget -v2c -c public <target> CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsNodeId.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.147.1.3.1 s <value>

Start monitoring Cisco MPLS transport network routers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-IETF-MPLS-ID-STD-03-MIB::cmplsNodeId OID value, configure state conditions and alerts, and monitor any Cisco MPLS transport network routers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.147cmplsIdStdMIBCISCO-IETF-MPLS-ID-STD-03-MIB
1.3.6.1.4.1.9.10.147.1cmplsIdObjectsCISCO-IETF-MPLS-ID-STD-03-MIB
1.3.6.1.4.1.9.10.147.1.3cmplsNodeIdCISCO-IETF-MPLS-ID-STD-03-MIB