All MIBs › CISCO-GGSN-MIB › cGgsnDownlinkVerifyMsDisable
cGgsnDownlinkVerifyMsDisable
Module: CISCO-GGSN-MIB
OID (symbolic): CISCO-GGSN-MIB::cGgsnDownlinkVerifyMsDisable
OID (numeric): 1.3.6.1.4.1.9.9.240.1.3.20
Node type: OBJECT-TYPE
Type: TruthValue
Access: read-write
Description: This object enables the feature which will allow the GGSN to route IP packets beyond MS. This works only if a static route is added in GGSN to the node beyond the MS.
On enabling this feature, GGSN will route the packets in both process switch path and cef switch path. This is supported only for IP PDP type.
This feature has some limitations: - This is not scalable, since the operator has to add static route to all the node beyond the MS. - Only works for MS having static address. - In case of GTPv1 the MS has to select TFT's so as to allow traffic flow in the downlink direction. - IP address assignment/Radius for the devices behind the MS needs to be done within the scope of that network; the GGSN will not provide this facility in anyway for the hosts behind the MS. - In case for MWAM and Cat6500/7600 environment, the static route should be added only on that particular GGSN on the MWAM from where the MS is reachable.
'true' - Routing beyond MS is enabled. 'false' - Routing beyond MS is disabled.
What is cGgsnDownlinkVerifyMsDisable?
A read-write control that enables the GGSN to route IP packets to destinations beyond the mobile station using a statically configured route, applying to both process-switched and CEF-switched paths.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.240.1.3.20 snmpwalk -v2c -c public <target> CISCO-GGSN-MIB::cGgsnDownlinkVerifyMsDisable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.240.1.3.20.1 snmpget -v2c -c public <target> CISCO-GGSN-MIB::cGgsnDownlinkVerifyMsDisable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.240.1.3.20.1 s <value>
Start monitoring Cisco GGSN (Gateway GPRS Support Node) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-GGSN-MIB::cGgsnDownlinkVerifyMsDisable OID value, configure state conditions and alerts, and monitor any Cisco GGSN (Gateway GPRS Support Node) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.240 | cGgsnMIB | CISCO-GGSN-MIB |
| 1.3.6.1.4.1.9.9.240.1 | cGgsnMIBObjects | CISCO-GGSN-MIB |
| 1.3.6.1.4.1.9.9.240.1.3 | cGgsnConfigurations | CISCO-GGSN-MIB |
| 1.3.6.1.4.1.9.9.240.1.3.20 | cGgsnDownlinkVerifyMsDisable | CISCO-GGSN-MIB |