CISCO-FLOW-MONITOR-MIB :: cfmConditionAlarmActions

MIB Reference — IPNetwork Monitor

All MIBsCISCO-FLOW-MONITOR-MIBcfmConditionAlarmActions

cfmConditionAlarmActions

Module: CISCO-FLOW-MONITOR-MIB

OID (symbolic): CISCO-FLOW-MONITOR-MIB::cfmConditionAlarmActions

OID (numeric): 1.3.6.1.4.1.9.9.692.1.4.1.1.16

Node type: OBJECT-TYPE

Type: Bits

Access: read-only

Description:

This object indicates the actions taken by the device when the alarm condition changes state:

'syslog' The device sends a syslog message.

'snmp' The device sends a cfmNotifyAlarm notification if and only if cfmNotifyEnable is set to 'true'.

The value of this column only has relevance if the corresponding instance of cfmConditionAlarm is 'discrete'

What is cfmConditionAlarmActions?

Indicates what actions the device takes when an alarm condition changes state, such as sending a syslog message or an SNMP notification. This read-only object reports the configured response behavior for flow monitor alarms.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.692.1.4.1.1.16
snmpwalk -v2c -c public <target> CISCO-FLOW-MONITOR-MIB::cfmConditionAlarmActions

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.692.1.4.1.1.16.1
snmpget -v2c -c public <target> CISCO-FLOW-MONITOR-MIB::cfmConditionAlarmActions.1

OID Breakdown

Numeric OIDNameModule
1isoLANART-AGENT
1.3orgBIANCA-BRICK-PPP-MIB
1.3.6dodBIANCA-BRICK-PPP-MIB
1.3.6.1internetBIANCA-BRICK-PPP-MIB
1.3.6.1.4privateBIANCA-BRICK-PPP-MIB
1.3.6.1.4.1enterprisesANIROOT-MIB
1.3.6.1.4.1.9ciscoCISCO-SMI
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
1.3.6.1.4.1.9.9.692ciscoFlowMonitorMIBCISCO-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.692.1ciscoFlowMonitorMIBObjectsCISCO-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.692.1.4cfmConditionsCISCO-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.692.1.4.1cfmConditionTableCISCO-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.692.1.4.1.1cfmConditionEntryCISCO-FLOW-MONITOR-MIB
1.3.6.1.4.1.9.9.692.1.4.1.1.16cfmConditionAlarmActionsCISCO-FLOW-MONITOR-MIB