All MIBs › CISCO-FCTRACEROUTE-MIB › fcTraceRouteOperStatus
fcTraceRouteOperStatus
Module: CISCO-FCTRACEROUTE-MIB
OID (symbolic): CISCO-FCTRACEROUTE-MIB::fcTraceRouteOperStatus
OID (numeric): 1.3.6.1.4.1.9.9.296.1.1.1.1.7
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-only
Description: This object indicates the operational status of this fcTraceRouteEntry.
inProgress(1) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently running.
success(2) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently complete and the whole path to the destination has been traced.
partialSuccess(3) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently partially successful.
failure(4) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry has currently failed due to resource limitations.
disabled(5) - Indicates that the trace route test as defined by this instance of fcTraceRouteEntry is currently disabled.
Initially the value of this object will be 'inProgress' when the test is being executed. Once the test completes, the value of this object will be 'success' or 'partialSuccess' depending on the outcome of the test.
If the value of this object is 'success', then the route to the target as determined by this test will be available in the fcTraceRouteHopsTable.
If the value of this object is 'partialSuccess', then the fcTraceRouteHopsTable will contain that portion of the route that was traced by the test.
If the value of this object is 'failure', then the test was not carried out and the fcTraceRouteHopsTable will not have any entries corresponding to this test.
If the value of the corresponding instance of fcTraceRouteAdminStatus is 'disable', then this object will have a value of 'disabled'.
What is fcTraceRouteOperStatus?
This read-only object reports the operational state of a Fibre Channel trace route test, such as whether it is currently in progress or has completed.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.296.1.1.1.1.7 snmpwalk -v2c -c public <target> CISCO-FCTRACEROUTE-MIB::fcTraceRouteOperStatus
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.296.1.1.1.1.7.1 snmpget -v2c -c public <target> CISCO-FCTRACEROUTE-MIB::fcTraceRouteOperStatus.1
Start monitoring Cisco MDS Fibre Channel SAN switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-FCTRACEROUTE-MIB::fcTraceRouteOperStatus OID value, configure state conditions and alerts, and monitor any Cisco MDS Fibre Channel SAN switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.296 | ciscoFcTraceRouteMIB | CISCO-FCTRACEROUTE-MIB |
| 1.3.6.1.4.1.9.9.296.1 | ciscoFcTraceRouteMIBObjects | CISCO-FCTRACEROUTE-MIB |
| 1.3.6.1.4.1.9.9.296.1.1 | fcTraceRouteConfiguration | CISCO-FCTRACEROUTE-MIB |
| 1.3.6.1.4.1.9.9.296.1.1.1 | fcTraceRouteTable | CISCO-FCTRACEROUTE-MIB |
| 1.3.6.1.4.1.9.9.296.1.1.1.1 | fcTraceRouteEntry | CISCO-FCTRACEROUTE-MIB |
| 1.3.6.1.4.1.9.9.296.1.1.1.1.7 | fcTraceRouteOperStatus | CISCO-FCTRACEROUTE-MIB |