CISCO-DS1-EXT-MIB :: cds1CallTrunkConditionEnable

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-DS1-EXT-MIBcds1CallTrunkConditionEnable

cds1CallTrunkConditionEnable

Module: CISCO-DS1-EXT-MIB

OID (symbolic): CISCO-DS1-EXT-MIB::cds1CallTrunkConditionEnable

OID (numeric): 1.3.6.1.4.1.9.9.229.1.1.2.1.1

Node type: OBJECT-TYPE

Type: TruthValue

Access: read-write

Description: This object specifies whether trunk-condition is enabled. The value 'true' means trunk-condition enable and the value 'false' means trunk-condition disable. If this object is set to 'true', gateway will apply trunk conditioning on the DS0's of this DS1 interface that are in alarm. Trunk Conditioning - gateway will transmit idle code pattern for the first 2.5 secs and then transmit seized code, both idle code and seized code are specified by the 'ds0IdleCode' and 'ds0SeizedCode' MIB objects in the CISCO-CAS-IF-EXT-MIB.

This object is applicable for trunking applications only.

What is cds1CallTrunkConditionEnable?

A read-write flag that enables or disables trunk conditioning on the DS0 channels of a DS1 interface, typically applied by the gateway when the interface goes down.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.229.1.1.2.1.1
snmpwalk -v2c -c public <target> CISCO-DS1-EXT-MIB::cds1CallTrunkConditionEnable

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.229.1.1.2.1.1.1
snmpget -v2c -c public <target> CISCO-DS1-EXT-MIB::cds1CallTrunkConditionEnable.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.229.1.1.2.1.1.1 s <value>

Start monitoring Cisco routers and access servers with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DS1-EXT-MIB::cds1CallTrunkConditionEnable OID value, configure state conditions and alerts, and monitor any Cisco routers and access servers from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.229ciscoDs1ExtMIBCISCO-DS1-EXT-MIB
1.3.6.1.4.1.9.9.229.1ciscoDs1MIBObjectsCISCO-DS1-EXT-MIB
1.3.6.1.4.1.9.9.229.1.1cds1ConfigCISCO-DS1-EXT-MIB
1.3.6.1.4.1.9.9.229.1.1.2cds1CallConfigTableCISCO-DS1-EXT-MIB
1.3.6.1.4.1.9.9.229.1.1.2.1cds1CallConfigEntryCISCO-DS1-EXT-MIB
1.3.6.1.4.1.9.9.229.1.1.2.1.1cds1CallTrunkConditionEnableCISCO-DS1-EXT-MIB