CISCO-DDP-IAPP-MIB :: cDdpIappMcastIpAddr

MIB Reference — IPNetwork Monitor · Updated October 05, 2026

All MIBs › CISCO-DDP-IAPP-MIB › cDdpIappMcastIpAddr

cDdpIappMcastIpAddr

Module: CISCO-DDP-IAPP-MIB

OID (symbolic): CISCO-DDP-IAPP-MIB::cDdpIappMcastIpAddr

OID (numeric): 1.3.6.1.4.1.9.9.277.1.1.2

Node type: OBJECT-TYPE

Type: InetAddress

Access: read-write

Description: Multicast IP network address over which applicable IAPP packets are exchanged between stations.

What is cDdpIappMcastIpAddr?

Configures the multicast IP address used to exchange Inter-Access Point Protocol (IAPP) packets between wireless access points.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.277.1.1.2
snmpwalk -v2c -c public <target> CISCO-DDP-IAPP-MIB::cDdpIappMcastIpAddr

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.277.1.1.2.1
snmpget -v2c -c public <target> CISCO-DDP-IAPP-MIB::cDdpIappMcastIpAddr.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.277.1.1.2.1 s <value>

Start monitoring Cisco 802.11 wireless access point/workgroup bridge/repeater with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-DDP-IAPP-MIB::cDdpIappMcastIpAddr OID value, configure state conditions and alerts, and monitor any Cisco 802.11 wireless access point/workgroup bridge/repeater from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.277ciscoDdpIappMIBCISCO-DDP-IAPP-MIB
1.3.6.1.4.1.9.9.277.1ciscoDdpIappMIBObjectsCISCO-DDP-IAPP-MIB
1.3.6.1.4.1.9.9.277.1.1cDdpIappGlobalConfigCISCO-DDP-IAPP-MIB
1.3.6.1.4.1.9.9.277.1.1.2cDdpIappMcastIpAddrCISCO-DDP-IAPP-MIB