All MIBs › CISCO-CLASS-BASED-QOS-MIB › cbQosQueueingCfgBandwidth
cbQosQueueingCfgBandwidth
Module: CISCO-CLASS-BASED-QOS-MIB
OID (symbolic): CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidth
OID (numeric): 1.3.6.1.4.1.9.9.166.1.9.1.1.1
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: The type of bandwidth configuration value represented by this object is indicated by the value of cbQosQueueingCfgBandwidthUnits for this entry.
If the cbQosQueueingCfgBandwidthUnits value is 'kbps(1)' or 'percentage(2)', this object represents the configured bandwidth allocated to this traffic class.In the case of a bandwidth policy, this value represents a minimum bandwidth guarantee for the traffic class. In the case of a priority policy, this value represents the maximum rate at which priority service is guaranteed.
If the cbQosQueueingCfgBandwidthUnits value is 'percentageRemaining(3)', this object represents the the percentage of the unallocated bandwidth to allocate to this class. If the cbQosQueueingCfgBandwidthUnits value is 'ratioRemaining(4)', this object represents the ratio value, relative to other class' configured ratio values, used to determine the portion of the unallocated bandwidth to apply to this class.
What is cbQosQueueingCfgBandwidth?
Reports the configured bandwidth value allocated to a traffic class's queue, expressed in the units indicated by the associated bandwidth-units object (e.g., kbps or percentage).
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.166.1.9.1.1.1 snmpwalk -v2c -c public <target> CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidth
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.166.1.9.1.1.1.1 snmpget -v2c -c public <target> CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidth.1
Start monitoring Cisco routers and switches (class-based QoS) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CLASS-BASED-QOS-MIB::cbQosQueueingCfgBandwidth OID value, configure state conditions and alerts, and monitor any Cisco routers and switches (class-based QoS) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.166 | ciscoCBQosMIB | CISCO-CLASS-BASED-QOS-MIB |
| 1.3.6.1.4.1.9.9.166.1 | ciscoCBQosMIBObjects | CISCO-CLASS-BASED-QOS-MIB |
| 1.3.6.1.4.1.9.9.166.1.9 | cbQosQueueingCfg | CISCO-CLASS-BASED-QOS-MIB |
| 1.3.6.1.4.1.9.9.166.1.9.1 | cbQosQueueingCfgTable | CISCO-CLASS-BASED-QOS-MIB |
| 1.3.6.1.4.1.9.9.166.1.9.1.1 | cbQosQueueingCfgEntry | CISCO-CLASS-BASED-QOS-MIB |
| 1.3.6.1.4.1.9.9.166.1.9.1.1.1 | cbQosQueueingCfgBandwidth | CISCO-CLASS-BASED-QOS-MIB |