All MIBs › CISCO-CATOS-ACL-QOS-MIB › caqQosDefaultTrustState
caqQosDefaultTrustState
Module: CISCO-CATOS-ACL-QOS-MIB
OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultTrustState
OID (numeric): 1.3.6.1.4.1.9.9.179.1.3.14.1.3
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Indicates the default assigned trust state.
If trustCos(2) is specified, the default DSCP value of an unmatched packet should refer to caqCosToDscpDscp object in caqCosToDscpTable to transfer layer 2 CoS value to DSCP value.
If trustIpPrec(3) is specified, the default DSCP value of an unmatched packet should refer to caqIpPrecToDscpDscp object in caqIpPrecToDscpTable to transfer IP Precedence value to DSCP value.
If trustDscp(4) is specified, the default DSCP value of an unmatched packet is the one which packets carry.
If noTrust(1) is specified, the default DSCP value of an unmatched packet will have the value of caqQosDefaultDscp object.
What is caqQosDefaultTrustState?
This read-write setting configures the default QoS trust state (e.g. trust CoS, trust IP precedence, or no trust) applied to packets that don't match any classification rule.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.3 snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultTrustState
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.3.1 snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultTrustState.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.3.1 i <value>
Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultTrustState OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1 | ciscoCatOSAclQosMIBObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3 | caqAclObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14 | caqQosDefaultActionTable | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14.1 | caqQosDefaultActionEntry | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14.1.3 | caqQosDefaultTrustState | CISCO-CATOS-ACL-QOS-MIB |