All MIBs › CISCO-CATOS-ACL-QOS-MIB › caqQosDefaultAggregate
caqQosDefaultAggregate
Module: CISCO-CATOS-ACL-QOS-MIB
OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultAggregate
OID (numeric): 1.3.6.1.4.1.9.9.179.1.3.14.1.6
Node type: OBJECT-TYPE
Type: CaqPolicerNameOrEmpty
Access: read-write
Description: Indicates an aggregate policer name. The value of this object either matches the value of caqFlowPolicerName object of an active entry in caqFlowPolicerTable or has an empty string value. If there is no default aggregate policer defined for unmatched traffic, this object should be an empty string. If the aggregate(1) bit of caqFlowPolicingCpb object is turned off, this object should also be an an empty string. Otherwise it should match the value of caqFlowPolicerName of an entry in the caqFlowPolicerTable which has its RowStatus value to be active(1) and the type of the policer should be aggregate(2).
What is caqQosDefaultAggregate?
This read-write value names the aggregate policer applied by default to unmatched traffic, referencing an entry in the flow policer table or an empty string if none is defined.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.6 snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultAggregate
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.6.1 snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultAggregate.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.179.1.3.14.1.6.1 s <value>
Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqQosDefaultAggregate OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1 | ciscoCatOSAclQosMIBObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3 | caqAclObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14 | caqQosDefaultActionTable | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14.1 | caqQosDefaultActionEntry | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.14.1.6 | caqQosDefaultAggregate | CISCO-CATOS-ACL-QOS-MIB |