CISCO-CATOS-ACL-QOS-MIB :: caqMacPktClassifyVlansLow

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CATOS-ACL-QOS-MIBcaqMacPktClassifyVlansLow

caqMacPktClassifyVlansLow

Module: CISCO-CATOS-ACL-QOS-MIB

OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqMacPktClassifyVlansLow

OID (numeric): 1.3.6.1.4.1.9.9.179.1.1.10

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-write

Description: A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 0 to 2047. The first octet corresponds to VLANs with VlanIndex values of 0 through 7; the second octet to VLANs 8 through 15; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet.

For each VLAN, if Ethernet packet classify feature is enabled then the bit corresponding to that VLAN is set to '1'.

Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.

What is caqMacPktClassifyVlansLow?

A read-write bitmap string, one bit per VLAN, indicating which VLANs (index 0-2047) have MAC-based packet classification enabled.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.1.10
snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqMacPktClassifyVlansLow

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.1.10.1
snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqMacPktClassifyVlansLow.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.179.1.1.10.1 s <value>

Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqMacPktClassifyVlansLow OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.179ciscoCatOSAclQosMIBCISCO-CATOS-ACL-QOS-MIB
1.3.6.1.4.1.9.9.179.1ciscoCatOSAclQosMIBObjectsCISCO-CATOS-ACL-QOS-MIB
1.3.6.1.4.1.9.9.179.1.1caqGlobalObjectsCISCO-CATOS-ACL-QOS-MIB
1.3.6.1.4.1.9.9.179.1.1.10caqMacPktClassifyVlansLowCISCO-CATOS-ACL-QOS-MIB