All MIBs › CISCO-CATOS-ACL-QOS-MIB › caqFlowPolicerExcessBurstGrant
caqFlowPolicerExcessBurstGrant
Module: CISCO-CATOS-ACL-QOS-MIB
OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqFlowPolicerExcessBurstGrant
OID (numeric): 1.3.6.1.4.1.9.9.179.1.3.8.1.13
Node type: OBJECT-TYPE
Type: Unsigned32
Access: read-only
Description: The granted excess burst size of the flow. If the status of this row is not active, the value of this object will be the same as caqFlowPolicerExcessBurstRequest's value.
If the QoS function is enabled and the policy source is from local configuration, this MIB object is from the runtime hardware information. Due to hardware granularity, the granted value may not be the same as the value specified by caqFlowPolicerExcessBurstRequest object. It will be the closest value to the requested one that the hardware can support.
If the caqFlowPolicerExcessBurstSupport is false(2), this object cannot be instantiated.
What is caqFlowPolicerExcessBurstGrant?
Reports the actual excess burst size granted by the device for the policer, which may differ from the requested value depending on policy source.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.8.1.13 snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqFlowPolicerExcessBurstGrant
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.8.1.13.1 snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqFlowPolicerExcessBurstGrant.1
Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqFlowPolicerExcessBurstGrant OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1 | ciscoCatOSAclQosMIBObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3 | caqAclObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.8 | caqFlowPolicerTable | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.8.1 | caqFlowPolicerEntry | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.8.1.13 | caqFlowPolicerExcessBurstGrant | CISCO-CATOS-ACL-QOS-MIB |