All MIBs › CISCO-CATOS-ACL-QOS-MIB › caqAclHitCountVlansHigh
caqAclHitCountVlansHigh
Module: CISCO-CATOS-ACL-QOS-MIB
OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqAclHitCountVlansHigh
OID (numeric): 1.3.6.1.4.1.9.9.179.1.9.2
Node type: OBJECT-TYPE
Type: OCTET STRING
Access: read-write
Description: A string of octets containing one bit per VLAN for VLANs with VlanIndex value of 2048 to 4095. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063; etc. The most significant bit of each octet corresponds to the lowest value VlanIndex in that octet.
For each VLAN, if ACL hit count feature is enabled then the bit corresponding to that VLAN is set to '1'.
Note that if the length of this string is less than 256 octets, any 'missing' octets are assumed to contain the value zero. A NMS may omit any zero-valued octets from the end of this string in order to reduce SetPDU size, and the agent may also omit zero-valued trailing octets, to reduce the size of GetResponse PDUs.
This object is only instantiated when the vlanAclHitCount(0) bit is set to '1' in the caqAclFeatureCpb object.
What is caqAclHitCountVlansHigh?
This read-write bitmap indicates which VLANs (with VLAN index values 2048-4095) have ACL hit-count tracking enabled, with each bit representing one VLAN.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.9.2 snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqAclHitCountVlansHigh
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.9.2.1 snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqAclHitCountVlansHigh.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.179.1.9.2.1 s <value>
Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqAclHitCountVlansHigh OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1 | ciscoCatOSAclQosMIBObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.9 | caqAclHitCountObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.9.2 | caqAclHitCountVlansHigh | CISCO-CATOS-ACL-QOS-MIB |