All MIBs › CISCO-CATOS-ACL-QOS-MIB › caqAclCapabilities
caqAclCapabilities
Module: CISCO-CATOS-ACL-QOS-MIB
OID (symbolic): CISCO-CATOS-ACL-QOS-MIB::caqAclCapabilities
OID (numeric): 1.3.6.1.4.1.9.9.179.1.3.1
Node type: OBJECT-TYPE
Type: Bits
Access: read-only
Description: Indicates what ACL capabilities are supported on the device. An ACL belongs to one of the following types: IP, IPX and MAC. Furthermore, an ACL can be used for either QoS or Security feature.
If ipQos(0) bit is turned on, caqIpAceTable can be instantiated for Qos feature, otherwise it can not.
If ipxQos(1) bit is turned on, caqIpxAceTable can be instantiated for Qos feature, otherwise it can not.
If macQos(2) bit is turned on, caqMacAceTable can be instantiated for Qos feature, otherwise it can not.
If ipSecurity(3) bit is turned on, caqIpAceTable can be instantiated for Security feature, otherwise it can not.
If ipxSecurity(4) bit is turned on, caqIpxAceTable can be instantiated for Security feature, otherwise it can not.
If macSecurity(5) bit is turned on, caqMacAceTable can be instantiated for Security feature, otherwise it can not.
What is caqAclCapabilities?
Reports a bitmask of the ACL capabilities supported by the device, indicating which combinations of IP, IPX, MAC, QoS, and security ACL types can be used.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.1 snmpwalk -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqAclCapabilities
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.179.1.3.1.1 snmpget -v2c -c public <target> CISCO-CATOS-ACL-QOS-MIB::caqAclCapabilities.1
Start monitoring Cisco Catalyst 5000/6000 series switches running CatOS (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CATOS-ACL-QOS-MIB::caqAclCapabilities OID value, configure state conditions and alerts, and monitor any Cisco Catalyst 5000/6000 series switches running CatOS (legacy) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.179 | ciscoCatOSAclQosMIB | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1 | ciscoCatOSAclQosMIBObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3 | caqAclObjects | CISCO-CATOS-ACL-QOS-MIB |
| 1.3.6.1.4.1.9.9.179.1.3.1 | caqAclCapabilities | CISCO-CATOS-ACL-QOS-MIB |