All MIBs › CISCO-CALLHOME-MIB › ccmPeriodicAlertGroupInterval
ccmPeriodicAlertGroupInterval
Module: CISCO-CALLHOME-MIB
OID (symbolic): CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupInterval
OID (numeric): 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: This object specifies the type of periodic configuration for this alert group.
This object is only instantiated when the value of corresponding instance of ccmPeriodicAlertGroupEnable is 'true'.
A value of 'daily' indicates that periodic message will be generated everyday at time specified by the objects ccmPeriodicAlertGroupHour and ccmPeriodicAlertGroupMinute.
A value of 'weekly' indicates that periodic message will be generated once every week on the day specified by the object ccmPeriodicAlertGroupDayOfWeek and at the time specified by the objects ccmPeriodicAlertGroupHour and ccmPeriodicAlertGroupMinute.
A value of 'monthly' indicates that periodic message will be generated once every month on day of the month specified by the object ccmPeriodicAlertGroupDayOfMonth and at time specified by the objects ccmPeriodicAlertGroupHour and ccmPeriodicAlertGroupMinute.
A value of 'hourly' indicates that periodic messages will be generated once every hour. ccmPeriodicAlertGroupMinute specifies the minute of hour at which the hourly message is generated.
A value of 'minutes' indicates that a message will be generated periodically after the interval specified in ccmPeriodicAlertGroupIntervalMinutes expires.
What is ccmPeriodicAlertGroupInterval?
A read-write setting defining the periodic schedule type (e.g. daily, weekly, monthly) for sending Call Home alerts for an alert group, active only when periodic alerts are enabled.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1 snmpwalk -v2c -c public <target> CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupInterval
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1.1 snmpget -v2c -c public <target> CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupInterval.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1.1 i <value>
Start monitoring Cisco routers/switches (Call Home diagnostic/alerting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupInterval OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (Call Home diagnostic/alerting) from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.9 | ciscoMgmt | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.9.300 | ciscoCallHomeMIB | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1 | ciscoCallHomeMIBObjects | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1.1 | ccmCallHomeConfiguration | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1.1.30 | ccmCallHomeAlertGroupCfg | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1.1.30.2 | ccmPeriodicAlertGroupTable | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1 | ccmPeriodicAlertGroupEntry | CISCO-CALLHOME-MIB |
| 1.3.6.1.4.1.9.9.300.1.1.30.2.1.1 | ccmPeriodicAlertGroupInterval | CISCO-CALLHOME-MIB |