CISCO-CALLHOME-MIB :: ccmPeriodicAlertGroupDayOfMonth

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-CALLHOME-MIBccmPeriodicAlertGroupDayOfMonth

ccmPeriodicAlertGroupDayOfMonth

Module: CISCO-CALLHOME-MIB

OID (symbolic): CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupDayOfMonth

OID (numeric): 1.3.6.1.4.1.9.9.300.1.1.30.2.1.3

Node type: OBJECT-TYPE

Type: Unsigned32

Access: read-write

Description: This object specifies the day of the month on which user wishes to receive periodic Call Home alert messages for this entry.

If the day specified is beyond the last day of a month, the alert message will be generated on the last day of that month.

This object is only instantiated when the value of corresponding instance of ccmPeriodicAlertGroupEnable is 'true' and the value of corresponding instance of ccmPeriodicAlertGroupInterval is 'monthly'.

What is ccmPeriodicAlertGroupDayOfMonth?

A read-write setting specifying the day of the month for sending periodic Call Home alert messages; if the day exceeds the month's length, the message is sent on the last day of the month.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.3
snmpwalk -v2c -c public <target> CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupDayOfMonth

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.3.1
snmpget -v2c -c public <target> CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupDayOfMonth.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.9.300.1.1.30.2.1.3.1 i <value>

SNMPv3 example:

snmpget -v3 -l authPriv -u snmpv3-user -a SHA -A "AuthPassword1" -x AES -X "PrivPassword1" <target> ccmPeriodicAlertGroupDayOfMonth.1

Start monitoring Cisco routers/switches (Call Home diagnostic/alerting) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-CALLHOME-MIB::ccmPeriodicAlertGroupDayOfMonth OID value, configure state conditions and alerts, and monitor any Cisco routers/switches (Call Home diagnostic/alerting) from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.9ciscoMgmtCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.9.300ciscoCallHomeMIBCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1ciscoCallHomeMIBObjectsCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1.1ccmCallHomeConfigurationCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1.1.30ccmCallHomeAlertGroupCfgCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1.1.30.2ccmPeriodicAlertGroupTableCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1.1.30.2.1ccmPeriodicAlertGroupEntryCISCO-CALLHOME-MIB
1.3.6.1.4.1.9.9.300.1.1.30.2.1.3ccmPeriodicAlertGroupDayOfMonthCISCO-CALLHOME-MIB