CISCO-ATM-EXT-MIB

All MIBs › CISCO-ATM-EXT-MIB

Organization: Cisco Systems, Inc.

Last Updated: 2003-01-06

Category: ATM

Description: Extends standard ATM interface management with Cisco-specific ATM MIB objects.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CISCO-ATM-EXT-MIB?

CISCO-ATM-EXT-MIB is a Cisco Systems, Inc. proprietary MIB extending the standard ATM-MIB with AAL5 VCC and F5 OAM continuity-check management. Its VCC extension table, keyed by VCC, records compression-enabled flag, voice flag, and inbound/outbound F5 OAM cell counts, while a VCL OAM table records loopback/retry frequency, up/down retry counts, end-to-end/segment continuity-check activate/deactivate counts and retry frequency, manage flag, loopback status, VC state, and end/segment CC status and VC state. As a configuration/performance MIB it lets an administrator confirm F5 OAM continuity-check activation and watch OAM cell counts on a Cisco ATM interface. It is deployed on Cisco Systems ATM interface equipment (F5 OAM extensions). Engineers can download the CISCO-ATM-EXT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CISCO-ATM-EXT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cisco Systems ATM interface equipment (F5 OAM extensions)

Monitoring Examples

An administrator checks catmxVclOamEndCCStatus and cAal5VccExtInF5OamCells to confirm end-to-end continuity-check status and OAM cell volume on a Cisco ATM interface.

What Can Be Monitored

F5 OAM continuity-check status and cell counts

Imported Objects

From ATM-MIB

aal5VccEntry	OBJECT-TYPE
atmVclEntry	OBJECT-TYPE

From CISCO-SMI

ciscoMgmt

OBJECT-IDENTITY

From SNMPv2-CONF

MODULE-COMPLIANCE
OBJECT-GROUP

From SNMPv2-SMI

Counter32
MODULE-IDENTITY
OBJECT-TYPE
Unsigned32

From SNMPv2-TC

TEXTUAL-CONVENTION
TruthValue

How to Use in IPNetwork Monitor

Example using cAal5VccExtInF5OamCells OID:

Select a Cisco ATM interface equipment as the target host to create a monitor — the SNMP service should be up and running on it. Click New Monitor, then check SNMP Custom on the Favorites tab, click Next, and confirm the host. On the next page, click Select... to open the built-in SNMP MIB Browser and type cAal5VccExtInF5OamCells into the Find box to locate it in the OID tree, selecting the specific row/instance you want to monitor since this is a table column, then select it and click OK. It reports the number of OAM F5 end to end loopback cells received through the VCC. On the monitor's Main parameters page you can set the target's SNMP port (default 161), credentials, polling interval, and other settings — see the SNMP Monitor help for details. On the State conditions and Alerting tabs, configure when the monitor should change state and trigger an alert; since this is a Counter32-type OID, Value bounds is the most useful condition here — trigger an alert if the counter increases sharply between polls relative to its normal baseline, since an unexpected spike often reflects a real change in traffic or activity. Click Finish to create the monitor; you can adjust any parameter later.

OIDs

OID symbolic	OID numeric	Type	Access	Description
ciscoAtmExtMIB	1.3.6.1.4.1.9.9.88			An extension to the Cisco ATM MIB module for managing ATM implementations. Acronyms and terms used in the MIB module: AAL5 -- ATM adaptation layer 5. AIS -- Alarm Indication Signal. CC -- Continuity Check. End-to-end -- End-to-end continuity checking. Monitoring occurs on the entire VC between two ATM end stations. F5 OAM -- OAM information flow between network elements (NEs) used within virtual connections to report degraded virtual channel performance. OAM -- Operations, Administration and Maintenance. RDI -- Remote Detection Indication. Segment -- Segment continuity checking. Monitoring occurs on a VC segment between a router and a first-hop ATM switch. VC -- Virtual Channel. VCC -- Virtual Channel Connection. VCL -- Virtual Channel Link.
ciscoAtmExtMIBObjects	1.3.6.1.4.1.9.9.88.1
cAal5VccExtMIBObjects	1.3.6.1.4.1.9.9.88.1.1
cAal5VccExtTable	1.3.6.1.4.1.9.9.88.1.1.1		not-accessible	This table contains AAL5 VCC performance parameters beyond that provided by cAal5VccEntry.
cAal5VccExtEntry	1.3.6.1.4.1.9.9.88.1.1.1.1		not-accessible	This list contains the additinal AAL5 VCC performance parameters beyond that provided by cAal5VccEntry.
T/F cAal5VccExtCompEnabled	1.3.6.1.4.1.9.9.88.1.1.1.1.1	TruthValue	read-only	Boolean, if compression enabled for VCC.
T/F cAal5VccExtVoice	1.3.6.1.4.1.9.9.88.1.1.1.1.2	TruthValue	read-only	Boolean, TRUE if VCC is used to carry voice.
C32 cAal5VccExtInF5OamCellsEx	1.3.6.1.4.1.9.9.88.1.1.1.1.3	Counter32	read-only	Number of OAM F5 end to end loopback cells received through the VCC.
C32 cAal5VccExtOutF5OamCells	1.3.6.1.4.1.9.9.88.1.1.1.1.4	Counter32	read-only	Number of OAM F5 end to end loopback cells sent through the VCC.
catmxVcl	1.3.6.1.4.1.9.9.88.1.2
catmxVclOamTable	1.3.6.1.4.1.9.9.88.1.2.1		not-accessible	This table contains Virtual Channel Link (VCL) Oam configuration and state information. This table augments the atmVclTable.
catmxVclOamEntry	1.3.6.1.4.1.9.9.88.1.2.1.1		not-accessible	This list contains Virtual Channel Link (VCL) configuration and state information beyond that provided by atmVclEntry.
U32 catmxVclOamLoopbackFreq	1.3.6.1.4.1.9.9.88.1.2.1.1.1	Unsigned32	read-write	Specifies OAM loopback frequency.
U32 catmxVclOamRetryFreq	1.3.6.1.4.1.9.9.88.1.2.1.1.2	Unsigned32	read-write	Specifies OAM retry polling frequency.
U32 catmxVclOamUpRetryCount	1.3.6.1.4.1.9.9.88.1.2.1.1.3	Unsigned32	read-write	Specifies OAM retry count before declaring a VC is up.
U32 catmxVclOamDownRetryCount	1.3.6.1.4.1.9.9.88.1.2.1.1.4	Unsigned32	read-write	Specifies OAM retry count before declaring a VC is down.
U32 catmxVclOamEndCCActCount	1.3.6.1.4.1.9.9.88.1.2.1.1.5	Unsigned32	read-write	Specifies OAM End-to-end Continuity check (CC) Activation retry count.
U32 catmxVclOamEndCCDeActCount	1.3.6.1.4.1.9.9.88.1.2.1.1.6	Unsigned32	read-write	Specifies OAM End-to-end Continuity check (CC) Deactivation retry count.
U32 catmxVclOamEndCCRetryFreq	1.3.6.1.4.1.9.9.88.1.2.1.1.7	Unsigned32	read-write	Specifies OAM End-to-end Continuity check (CC) Activation/Deactivation retry frequency.
U32 catmxVclOamSegCCActCount	1.3.6.1.4.1.9.9.88.1.2.1.1.8	Unsigned32	read-write	Specifies OAM Segment Continuity check (CC) Activation retry count.
U32 catmxVclOamSegCCDeActCount	1.3.6.1.4.1.9.9.88.1.2.1.1.9	Unsigned32	read-write	Specifies OAM Segment Continuity check (CC) Deactivation retry count.
U32 catmxVclOamSegCCRetryFreq	1.3.6.1.4.1.9.9.88.1.2.1.1.10	Unsigned32	read-write	Specifies OAM Segment Continuity check (CC) Activation/Deactivation retry frequency.
T/F catmxVclOamManage	1.3.6.1.4.1.9.9.88.1.2.1.1.11	TruthValue	read-write	Specifies OAM Enable/Disable on the VC. true(1) indicates that OAM is enabled on the VC. false(2) indicates that OAM is disabled on the VC.
INT catmxVclOamLoopBkStatus	1.3.6.1.4.1.9.9.88.1.2.1.1.12	INTEGER	read-only	Indicates OAM loopback status of the VC. disabled(1) -- No OAMs on this VC. sent(2) -- OAM sent, waiting for echo. received(3) -- OAM received from target. failed(4) -- Last OAM did not return.
INT catmxVclOamVcState	1.3.6.1.4.1.9.9.88.1.2.1.1.13	INTEGER	read-only	Indicates the state of VC OAM. downRetry(1) -- Loopback failed. Retry sending loopbacks with retry frequency. VC is up. verified(2) -- Loopback is successful. notVerified(3) -- Not verified by loopback, AIS/RDI conditions are cleared. upRetry(4) -- Retry successive loopbacks. VC is down. aisRDI(5) -- Received AIS/RDI. Loopback are not sent in this state. aisOut(6) -- Sending AIS. Loopback and reply are not sent in this state. notManaged(7) -- VC is not managed by OAM.
OAM catmxVclOamEndCCStatus	1.3.6.1.4.1.9.9.88.1.2.1.1.14	OamCCStatus	read-only	Indicates OAM End-to-end Continuity check (CC) status.
OAM catmxVclOamSegCCStatus	1.3.6.1.4.1.9.9.88.1.2.1.1.15	OamCCStatus	read-only	Indicates OAM Segment Continuity check (CC) status.
OAM catmxVclOamEndCCVcState	1.3.6.1.4.1.9.9.88.1.2.1.1.16	OamCCVcState	read-only	Indicates OAM End-to-end Continuity check (CC) VC state.
OAM catmxVclOamSegCCVcState	1.3.6.1.4.1.9.9.88.1.2.1.1.17	OamCCVcState	read-only	Indicates OAM Segment Continuity check (CC) VC state.
C32 catmxVclOamCellsReceived	1.3.6.1.4.1.9.9.88.1.2.1.1.18	Counter32	read-only	Indicates the number of OAM cells received on this VC.
C32 catmxVclOamCellsSent	1.3.6.1.4.1.9.9.88.1.2.1.1.19	Counter32	read-only	Indicates the number of OAM cells sent on this VC.
C32 catmxVclOamCellsDropped	1.3.6.1.4.1.9.9.88.1.2.1.1.20	Counter32	read-only	Indicates the number of OAM cells dropped on this VC.
C32 catmxVclOamInF5ais	1.3.6.1.4.1.9.9.88.1.2.1.1.21	Counter32	read-only	Indicates the number of received OAM F5 Alarm Indication Signal (AIS) cells from the VC.
C32 catmxVclOamOutF5ais	1.3.6.1.4.1.9.9.88.1.2.1.1.22	Counter32	read-only	Indicates the number of transmitted OAM F5 Alarm Indication Signal (AIS) cells to the VC.
C32 catmxVclOamInF5rdi	1.3.6.1.4.1.9.9.88.1.2.1.1.23	Counter32	read-only	Indicates the number of received OAM F5 Remote Detection Indication (RDI) cells from the VC.
C32 catmxVclOamOutF5rdi	1.3.6.1.4.1.9.9.88.1.2.1.1.24	Counter32	read-only	Indicates the number of transmitted OAM F5 Remote Detection Indication (RDI) cells to the VC.
ciscoAal5ExtMIBConformance	1.3.6.1.4.1.9.9.88.2
ciscoAal5ExtMIBCompliances	1.3.6.1.4.1.9.9.88.2.1
ciscoAal5ExtMIBCompliance	1.3.6.1.4.1.9.9.88.2.1.1			This compliance is deprecated in favour of ciscoAal5ExtMIBComplianceRev1. The compliance statement for entities which implement this Cisco AAL5 Extention MIB and support data compression or voice features.
ciscoAal5ExtMIBComplianceRev1	1.3.6.1.4.1.9.9.88.2.1.2			The compliance statement for entities which implement CISCO-ATM-EXT-MIB.
ciscoAal5ExtMIBGroups	1.3.6.1.4.1.9.9.88.2.2
ciscoAal5ExtMIBGroup	1.3.6.1.4.1.9.9.88.2.2.1			A collection of objects providing AAL5 related parameters.
ciscoAtmExtVclOamGroup	1.3.6.1.4.1.9.9.88.2.2.2			A collection of objects providing Virtual Channel Link (VCL) OAM configuration and state information.

RFC description

Cisco vendor-private extension to the ATM MIB for managing ATM virtual circuits, AAL5 adaptation, and continuity checking.

Start monitoring Cisco ATM interface equipment with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CISCO-ATM-EXT-MIB