CISCO-ATM-CONN-MIB :: ciscoAtmVplRemoteVpi

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCISCO-ATM-CONN-MIBciscoAtmVplRemoteVpi

ciscoAtmVplRemoteVpi

Module: CISCO-ATM-CONN-MIB

OID (symbolic): CISCO-ATM-CONN-MIB::ciscoAtmVplRemoteVpi

OID (numeric): 1.3.6.1.4.1.9.10.13.1.1.1.1.19

Node type: OBJECT-TYPE

Type: Integer32

Access: read-write

Description: Soft PVP target VPI in calling side. 0 in called side.

What is ciscoAtmVplRemoteVpi?

Specifies the target VPI value on the calling side of a Soft PVP connection, and is 0 on the called side.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.13.1.1.1.1.19
snmpwalk -v2c -c public <target> CISCO-ATM-CONN-MIB::ciscoAtmVplRemoteVpi

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.13.1.1.1.1.19.1
snmpget -v2c -c public <target> CISCO-ATM-CONN-MIB::ciscoAtmVplRemoteVpi.1

Set instance 1 (SNMPv2c):

snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.13.1.1.1.1.19.1 i <value>

Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-CONN-MIB::ciscoAtmVplRemoteVpi OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.

OID Breakdown

Upper-level ancestors (8 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.9ciscoCAT2600-MIB
1.3.6.1.4.1.9.10ciscoExperimentCISCO-SMI
Numeric OIDNameModule
1.3.6.1.4.1.9.10.13ciscoAtmConnMIBCISCO-ATM-CONN-MIB
1.3.6.1.4.1.9.10.13.1ciscoAtmConnMIBObjectsCISCO-ATM-CONN-MIB
1.3.6.1.4.1.9.10.13.1.1ciscoAtmVplCISCO-ATM-CONN-MIB
1.3.6.1.4.1.9.10.13.1.1.1ciscoAtmVplTableCISCO-ATM-CONN-MIB
1.3.6.1.4.1.9.10.13.1.1.1.1ciscoAtmVplEntryCISCO-ATM-CONN-MIB
1.3.6.1.4.1.9.10.13.1.1.1.1.19ciscoAtmVplRemoteVpiCISCO-ATM-CONN-MIB