All MIBs › CISCO-ATM-CONN-MIB › ciscoAtmVclOamRdiEnable
ciscoAtmVclOamRdiEnable
Module: CISCO-ATM-CONN-MIB
OID (symbolic): CISCO-ATM-CONN-MIB::ciscoAtmVclOamRdiEnable
OID (numeric): 1.3.6.1.4.1.9.10.13.1.2.1.1.11
Node type: OBJECT-TYPE
Type: EnableStatus
Access: read-write
Description: Enable Remote Defect Indication OAM cell generation if an Alarm Indication Signal OAM cell is received.
What is ciscoAtmVclOamRdiEnable?
A read-write setting that enables the device to generate ATM OAM Remote Defect Indication (RDI) cells in response to receiving an Alarm Indication Signal (AIS) cell, signaling the fault back to the originating end.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.9.10.13.1.2.1.1.11 snmpwalk -v2c -c public <target> CISCO-ATM-CONN-MIB::ciscoAtmVclOamRdiEnable
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.9.10.13.1.2.1.1.11.1 snmpget -v2c -c public <target> CISCO-ATM-CONN-MIB::ciscoAtmVclOamRdiEnable.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.9.10.13.1.2.1.1.11.1 s <value>
Start monitoring Cisco ATM switches with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CISCO-ATM-CONN-MIB::ciscoAtmVclOamRdiEnable OID value, configure state conditions and alerts, and monitor any Cisco ATM switches from a single console.
OID Breakdown
Upper-level ancestors (8 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.9 | cisco | CAT2600-MIB |
| 1.3.6.1.4.1.9.10 | ciscoExperiment | CISCO-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.9.10.13 | ciscoAtmConnMIB | CISCO-ATM-CONN-MIB |
| 1.3.6.1.4.1.9.10.13.1 | ciscoAtmConnMIBObjects | CISCO-ATM-CONN-MIB |
| 1.3.6.1.4.1.9.10.13.1.2 | ciscoAtmVcl | CISCO-ATM-CONN-MIB |
| 1.3.6.1.4.1.9.10.13.1.2.1 | ciscoAtmVclTable | CISCO-ATM-CONN-MIB |
| 1.3.6.1.4.1.9.10.13.1.2.1.1 | ciscoAtmVclEntry | CISCO-ATM-CONN-MIB |
| 1.3.6.1.4.1.9.10.13.1.2.1.1.11 | ciscoAtmVclOamRdiEnable | CISCO-ATM-CONN-MIB |