CIENA-CES-OAM-MIB :: cienaCesOamOrgSpecificTx

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-OAM-MIBcienaCesOamOrgSpecificTx

cienaCesOamOrgSpecificTx

Module: CIENA-CES-OAM-MIB

OID (symbolic): CIENA-CES-OAM-MIB::cienaCesOamOrgSpecificTx

OID (numeric): 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11

Node type: OBJECT-TYPE

Type: Counter32

Access: read-only

Description: A count of the number of Organization Specific OAMPDUs transmitted on this interface.

An Organization Specific OAMPDU is indicated by a valid frame with (1) destination MAC address equal to that of the reserved MAC address for Slow Protocols (See 43B of [802.3ah]), (2) a lengthOrType field equal to the reserved type for Slow Protocols, (3) a Slow Protocols subtype equal to that of the subtype reserved for OAM, and (4) an OAMPDU code equal to the OAM Organization Specific code.

Discontinuities of this counter can occur at re-initialization of the management system, and at other times as indicated by the value of the ifCounterDiscontinuityTime.

What is cienaCesOamOrgSpecificTx?

This Counter32 (frames) counts Organization Specific OAMPDUs transmitted on this interface, per its description, which is the 802.3ah-defined extension point vendors use to carry proprietary OAM information beyond the standard subtypes. Because these are vendor-defined frames, a rising count here typically reflects Ciena-specific extensions being exchanged with another Ciena device rather than any standards-based OAM function. An engineer troubleshooting interoperability between a Ciena device and a third-party OAM peer would expect this counter to stay at zero on that link, since the peer wouldn't understand or send Ciena's organization-specific frames.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11
snmpwalk -v2c -c public <target> CIENA-CES-OAM-MIB::cienaCesOamOrgSpecificTx

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11.1
snmpget -v2c -c public <target> CIENA-CES-OAM-MIB::cienaCesOamOrgSpecificTx.1

Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-OAM-MIB::cienaCesOamOrgSpecificTx OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.3cienaCesStatisticsCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.3.5cienaCesOamMibModuleCIENA-CES-OAM-MIB
1.3.6.1.4.1.1271.2.3.5.1cienaCesOamMIBCIENA-CES-OAM-MIB
1.3.6.1.4.1.1271.2.3.5.1.1cienaCesOamStatisticsCIENA-CES-OAM-MIB
1.3.6.1.4.1.1271.2.3.5.1.1.1cienaCesOamStatsTableCIENA-CES-OAM-MIB
1.3.6.1.4.1.1271.2.3.5.1.1.1.1cienaCesOamStatsEntryCIENA-CES-OAM-MIB
1.3.6.1.4.1.1271.2.3.5.1.1.1.1.11cienaCesOamOrgSpecificTxCIENA-CES-OAM-MIB