CIENA-CES-DATAPLANE-MIB :: cienaCesDpTsCosMapRcosMapL2RColour

MIB Reference — IPNetwork Monitor · Updated September 14, 2026

All MIBsCIENA-CES-DATAPLANE-MIBcienaCesDpTsCosMapRcosMapL2RColour

cienaCesDpTsCosMapRcosMapL2RColour

Module: CIENA-CES-DATAPLANE-MIB

OID (symbolic): CIENA-CES-DATAPLANE-MIB::cienaCesDpTsCosMapRcosMapL2RColour

OID (numeric): 1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.4

Node type: OBJECT-TYPE

Type: OCTET STRING

Access: read-only

Description: This object specifies the RCOLOR mapping for a given L2-CoS <0..7> and DEI bit value <0..1>. Octet 1: RCOLOR for L2-COS 0 with DEI of 0 Octet 2: RCOLOR for L2-COS 0 with DEI of 1 Octet 3: RCOLOR for L2-COS 1 with DEI of 0 Octet 4: RCOLOR for L2-COS 1 with DEI of 1 ... Octet 15: RCoS for L2-COS 7 with DEI of 0 Octet 16: RCoS for L2-COS 7 with DEI of 1

What is cienaCesDpTsCosMapRcosMapL2RColour?

This OCTET STRING decides whether each incoming 802.1p priority and DEI combination is treated as committed, green, or excess, yellow, traffic, alongside the RCoS mapping in the object above. It lets a customer's DEI-marked 'discard eligible' frames be automatically resolved to yellow while other frames at the same priority stay green. Octet 12, for example, covering L2-COS 5 with DEI 1, might be set to yellow(2) so DEI-marked voice frames are treated as excess rather than committed.

Examples

Walk all instances (SNMPv2c):

snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.4
snmpwalk -v2c -c public <target> CIENA-CES-DATAPLANE-MIB::cienaCesDpTsCosMapRcosMapL2RColour

Get a specific instance (index 1):

snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.4.1
snmpget -v2c -c public <target> CIENA-CES-DATAPLANE-MIB::cienaCesDpTsCosMapRcosMapL2RColour.1

Start monitoring Ciena CN5410 Carrier Ethernet Switch with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-DATAPLANE-MIB::cienaCesDpTsCosMapRcosMapL2RColour OID value, configure state conditions and alerts, and monitor any Ciena CN5410 Carrier Ethernet Switch from a single console.

OID Breakdown

Upper-level ancestors (9 from the standard OID tree / other modules)
Numeric OIDNameModule
1isoLANART-AGENT
1.3orgAirPair-MIB
1.3.6dodAirPair-MIB
1.3.6.1internetAirPair-MIB
1.3.6.1.4privateAirPair-MIB
1.3.6.1.4.1enterprisesAirPair-MIB
1.3.6.1.4.1.1271cienaCIENA-SMI
1.3.6.1.4.1.1271.2cienaCesCIENA-SMI
1.3.6.1.4.1.1271.2.1cienaCesConfigCIENA-SMI
Numeric OIDNameModule
1.3.6.1.4.1.1271.2.1.7cienaCesDataplaneMIBCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1cienaCesDpMIBObjectsCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1.3cienaCesDpTsCosMapCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1.3.1cienaCesDpTsCosMapRcosCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1.3.1.2cienaCesDpTsCosMapRcosMapTableCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1cienaCesDpTsCosMapRcosMapEntryCIENA-CES-DATAPLANE-MIB
1.3.6.1.4.1.1271.2.1.7.1.3.1.2.1.4cienaCesDpTsCosMapRcosMapL2RColourCIENA-CES-DATAPLANE-MIB