All MIBs › CIENA-CES-BENCHMARK-MIB › cienaCesBenchmarkProfileEntryHwSessionsRequired
cienaCesBenchmarkProfileEntryHwSessionsRequired
Module: CIENA-CES-BENCHMARK-MIB
OID (symbolic): CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkProfileEntryHwSessionsRequired
OID (numeric): 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41
Node type: OBJECT-TYPE
Type: Integer32
Access: read-only
Description: This represents the number of hardware sessions required to enable/run a test instance using this profile according to the profile's current configuration. One hardware session is required for each outer tag PCP and color configured. Ex 1) Encap type set to dot1q, c-pcp is 0,3 and c-color is set to green, 2 PCPs * 1 color = 2 hw sessions. Ex 2) Encap type set to qinq, s-pcp is 0,4,5 and s-color is set to green-yellow, then you need 3 PCPs * 2 colors = 6 hw sessions. Ex 3) Encap type set to untagged, only 1 hw session is required.
What is cienaCesBenchmarkProfileEntryHwSessionsRequired?
Exactly as described, this reports the number of hardware sessions this profile's current configuration would require to enable or run a test instance, calculated as roughly one session per combination of outer-tag PCP and color configured. Because available hardware sessions are a hard, finite platform-wide resource, this precomputed value lets an operator check, before even attempting to start a test instance using this profile, whether the platform actually has enough free sessions left to run it rather than discovering the failure only at start time. For example, a profile configured with 2 outer PCPs and both green and yellow colors enabled would report needing 4 hardware sessions, 2 PCPs times 2 colors, which an operator would need to confirm are actually free before attempting to start a test instance with it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41 snmpwalk -v2c -c public <target> CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkProfileEntryHwSessionsRequired
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41.1 snmpget -v2c -c public <target> CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkProfileEntryHwSessionsRequired.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkProfileEntryHwSessionsRequired OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.39 | cienaCesBenchmarkMIB | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1 | cienaCesBenchmarkMIBObjects | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1 | cienaCesBenchmarkModule | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11 | cienaCesBenchmarkProfileTable | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1 | cienaCesBenchmarkProfileEntry | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.11.1.41 | cienaCesBenchmarkProfileEntryHwSessionsRequired | CIENA-CES-BENCHMARK-MIB |