All MIBs › CIENA-CES-BENCHMARK-MIB › cienaCesBenchmarkGenTestSessionThroughputResultsMax
cienaCesBenchmarkGenTestSessionThroughputResultsMax
Module: CIENA-CES-BENCHMARK-MIB
OID (symbolic): CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionThroughputResultsMax
OID (numeric): 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9
Node type: OBJECT-TYPE
Type: CienaCesBenchmarkThroughputResult
Access: read-only
Description: Maximum throughput recorded for the given packet size in Mbps * 100. The value is multiplied by 100 to be able to send the results as an integer but should be divided by 100 when displayed to provide a 2 decimal point accuracy. A result of 123.45 is sent as 12345.
What is cienaCesBenchmarkGenTestSessionThroughputResultsMax?
This is the maximum throughput observed for this frame size across the test's iterations, encoded the same Mbps*100 way as the minimum, so a raw value of 12345 displays as 123.45 Mbps. An admin uses this specifically as the number most RFC2544/Y.1564 acceptance tests key off, since 'maximum achievable loss-free throughput' is the canonical result the KpiResult pass/fail field compares against the service's CIR. For example, cienaCesBenchmarkGenTestSessionThroughputResultsMax reading 100000 (1000.00 Mbps) on a nominal 1 Gbps circuit would indicate the port is achieving full line-rate throughput for that frame size.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9 snmpwalk -v2c -c public <target> CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionThroughputResultsMax
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9.1 snmpget -v2c -c public <target> CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionThroughputResultsMax.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-BENCHMARK-MIB::cienaCesBenchmarkGenTestSessionThroughputResultsMax OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.39 | cienaCesBenchmarkMIB | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1 | cienaCesBenchmarkMIBObjects | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1 | cienaCesBenchmarkModule | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15 | cienaCesBenchmarkGenTestSessionThroughputResultsTable | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1 | cienaCesBenchmarkGenTestSessionThroughputResultsEntry | CIENA-CES-BENCHMARK-MIB |
| 1.3.6.1.4.1.1271.2.1.39.1.1.15.1.9 | cienaCesBenchmarkGenTestSessionThroughputResultsMax | CIENA-CES-BENCHMARK-MIB |