All MIBs › CIENA-CES-ACCESS-LIST-MIB › cienaCesAclRuleDstIpAddrType
cienaCesAclRuleDstIpAddrType
Module: CIENA-CES-ACCESS-LIST-MIB
OID (symbolic): CIENA-CES-ACCESS-LIST-MIB::cienaCesAclRuleDstIpAddrType
OID (numeric): 1.3.6.1.4.1.1271.2.1.35.1.1.3.1.26
Node type: OBJECT-TYPE
Type: InetAddressType
Access: read-only
Description: Identifies the address family of the destination IP address (IPv4/IPv6). This field is not applicable when the cienaCesAclRuleMatchDstIpAddr field is set to False
What is cienaCesAclRuleDstIpAddrType?
This specifies the IPv4-versus-IPv6 address family of the paired cienaCesAclRuleDstIpAddr field, the destination-side analog of cienaCesAclRuleSrcIpAddrType, and it too is only meaningful when destination-IP matching is enabled on this rule. An admin in a dual-stack environment must set this correctly for the same reason as the source-side equivalent -- getting the address family wrong for the destination address would likely make an otherwise carefully constructed destination-based rule silently ineffective. For example, a rule meant to restrict access to an IPv6-only internal service would need this field explicitly set to ipv6 to correctly interpret the destination address value alongside it.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.35.1.1.3.1.26 snmpwalk -v2c -c public <target> CIENA-CES-ACCESS-LIST-MIB::cienaCesAclRuleDstIpAddrType
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.1271.2.1.35.1.1.3.1.26.1 snmpget -v2c -c public <target> CIENA-CES-ACCESS-LIST-MIB::cienaCesAclRuleDstIpAddrType.1
Start monitoring Ciena CES (Carrier Ethernet Switch) platforms with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CIENA-CES-ACCESS-LIST-MIB::cienaCesAclRuleDstIpAddrType OID value, configure state conditions and alerts, and monitor any Ciena CES (Carrier Ethernet Switch) platforms from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.1271 | ciena | CIENA-SMI |
| 1.3.6.1.4.1.1271.2 | cienaCes | CIENA-SMI |
| 1.3.6.1.4.1.1271.2.1 | cienaCesConfig | CIENA-SMI |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.1271.2.1.35 | cienaCesAccessListMIB | CIENA-CES-ACCESS-LIST-MIB |
| 1.3.6.1.4.1.1271.2.1.35.1 | cienaCesAccessListMIBObjects | CIENA-CES-ACCESS-LIST-MIB |
| 1.3.6.1.4.1.1271.2.1.35.1.1 | cienaCesAclConfiguration | CIENA-CES-ACCESS-LIST-MIB |
| 1.3.6.1.4.1.1271.2.1.35.1.1.3 | cienaCesAclRuleConfigTable | CIENA-CES-ACCESS-LIST-MIB |
| 1.3.6.1.4.1.1271.2.1.35.1.1.3.1 | cienaCesAclRuleConfigTableEntry | CIENA-CES-ACCESS-LIST-MIB |
| 1.3.6.1.4.1.1271.2.1.35.1.1.3.1.26 | cienaCesAclRuleDstIpAddrType | CIENA-CES-ACCESS-LIST-MIB |