All MIBs › CHIPCOM-MIB › chipEchoStart
chipEchoStart
Module: CHIPCOM-MIB
OID (symbolic): CHIPCOM-MIB::chipEchoStart
OID (numeric): 1.3.6.1.4.1.49.2.2.1
Node type: OBJECT-TYPE
Type: INTEGER
Access: read-write
Description: Setting chipEchoStart to startEcho(2) causes the device to begin an ICMP echo sequence using the parameters indicated by the rest of the chipEcho group.
What is chipEchoStart?
Read-write control that, when set to start the echo, triggers the device to begin sending an ICMP ping (echo) sequence using the configured target address and pattern.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.49.2.2.1 snmpwalk -v2c -c public <target> CHIPCOM-MIB::chipEchoStart
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.49.2.2.1.1 snmpget -v2c -c public <target> CHIPCOM-MIB::chipEchoStart.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.49.2.2.1.1 i <value>
Start monitoring Chipcom (3Com) Ethernet/Token Ring switching hub or LAN concentrator (legacy) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CHIPCOM-MIB::chipEchoStart OID value, configure state conditions and alerts, and monitor any Chipcom (3Com) Ethernet/Token Ring switching hub or LAN concentrator (legacy) from a single console.
OID Breakdown
Upper-level ancestors (9 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| 1.3.6.1.4.1.49 | chipcom | CHIPAGENT-MIB |
| 1.3.6.1.4.1.49.2 | chipmib02 | CHIPAGENT-MIB |
| 1.3.6.1.4.1.49.2.2 | chipEcho | CHIPAGENT-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.49.2.2.1 | chipEchoStart | CHIPCOM-MIB |