CAMBIUM-MIB

All MIBs › CAMBIUM-MIB

Organization: cambiumnetwork.

Last Updated: 2013-09-16

Category: Wireless/WiFi

Description: Manages Cambium Networks wireless broadband radio configuration, status, and performance counters.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CAMBIUM-MIB?

CAMBIUM-MIB is the vendor MIB from Cambium Networks covering its wireless broadband radio product line, used to manage configuration, status, and performance counters for point-to-point and point-to-multipoint wireless links. It generally exposes radio-link operational parameters (modulation, signal levels, throughput) alongside device configuration and fault/trap notifications, aligned with typical fixed-wireless broadband equipment MIBs. Its role in monitoring centers on radio and device health status, such as link up/down state, signal quality, and possibly device uptime or hardware component status, though no specific object names were captured in this extract to confirm exact coverage. It may depend on or coexist with standard IF-MIB and ENTITY-MIB structures for interface- and chassis-level data. It is deployed by wireless ISPs and enterprises using Cambium's PMP/PTP wireless broadband radios for backhaul or last-mile connectivity, relying on CAMBIUM-MIB SNMP monitoring to track radio link health across the network.

IPNetwork Monitor allows you to monitor SNMP objects defined in CAMBIUM-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Cambium Networks wireless broadband radio (PMP/PTP)

Monitoring Examples

No object names were provided in this extract, so a specific monitoring scenario cannot be grounded in real object names; typically such a radio MIB would be polled for link signal quality and throughput to detect a degrading wireless link. Because sample_objects is empty, further technical detail would require reviewing the MIB source directly.

What Can Be Monitored

radio link status
signal quality/level
throughput/performance counters
device configuration

Imported Objects

From SNMPv2-SMI

Counter32
Gauge32
Integer32
IpAddress
MODULE-IDENTITY
NOTIFICATION-TYPE
OBJECT-TYPE
enterprises

From SNMPv2-TC

TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
account	1.3.6.1.4.1.41010.1.5
ata	1.3.6.1.4.1.41010.1			cambiumnetwork Mib.
OCT authMode	1.3.6.1.4.1.41010.1.10.2.1.1.1.7	OCTET STRING	read-write	ssid_2g connect AuthMode.
INT autoChannel	1.3.6.1.4.1.41010.1.10.2.1.1.1.5	INTEGER	read-write	if your choice is 0,the system will choose 'autoChannel'.
I32 backupOutboundPort	1.3.6.1.4.1.41010.1.5.1.1.8	Integer32	read-write
OCT backupOutboundServer	1.3.6.1.4.1.41010.1.5.1.1.7	OCTET STRING	read-write
INT bandwidth	1.3.6.1.4.1.41010.1.10.2.1.1.1.14	INTEGER	read-write	Channel Bandwidth .0:20,1:20/40
INT bridgeMode	1.3.6.1.4.1.41010.1.2.1.1.4	INTEGER	read-write
INT bridgeType	1.3.6.1.4.1.41010.1.2.1.1.15	INTEGER	read-write
OCT bssid	1.3.6.1.4.1.41010.1.10.1	OCTET STRING	read-only
OCT cambium_id	1.3.6.1.4.1.41010.1.11.1	OCTET STRING	read-write	cambium id
OCT cambium_token	1.3.6.1.4.1.41010.1.11.2	OCTET STRING	read-write	cambium token
cambiumnetwork	1.3.6.1.4.1.41010
INT channel	1.3.6.1.4.1.41010.1.10.2.1.1.1.4	INTEGER	read-write	your choice of channel
OCT cns_staic_url	1.3.6.1.4.1.41010.1.11.3	OCTET STRING	read-write	Cloud Manager URL
INT codecType1	1.3.6.1.4.1.41010.1.5.1.1.13	INTEGER	read-write
INT codecType2	1.3.6.1.4.1.41010.1.5.1.1.14	INTEGER	read-write
INT codecType3	1.3.6.1.4.1.41010.1.5.1.1.15	INTEGER	read-write
INT codecType4	1.3.6.1.4.1.41010.1.5.1.1.16	INTEGER	read-write
INT codecType5	1.3.6.1.4.1.41010.1.5.1.1.17	INTEGER	read-write
OCT connectedWIFI	1.3.6.1.4.1.41010.1.10.3.1.1.1.2	OCTET STRING	read-write	DBID_WIFI_SSID.
INT connectionType	1.3.6.1.4.1.41010.1.1.7	INTEGER	read-only
I32 dataQos	1.3.6.1.4.1.41010.1.4.6	Integer32	read-write
INT daylightSavingTime	1.3.6.1.4.1.41010.1.7.7	INTEGER	read-write	Summer time.
INT defaultKey	1.3.6.1.4.1.41010.1.10.2.1.1.1.9	INTEGER	read-write	ssid_2g default wepkey.
deviceagent	1.3.6.1.4.1.41010.1.11
OCT displayName	1.3.6.1.4.1.41010.1.5.1.1.9	OCTET STRING	read-write
INT dnsMode	1.3.6.1.4.1.41010.1.2.1.1.8	INTEGER	read-write
OCT dstEndByWeek	1.3.6.1.4.1.41010.1.7.10	OCTET STRING	read-write	End time of summer time. Format: m.w.d.h This specifies day d of week w of month m. The day d must be between 0 (Sunday) and 6. The week w must be between 1 and 5; week 1 is the first week in which day d occurs, and week 5 specifies the last d day in the month. The month m should be between 1 and 12. Default setting is that summer time ends on the last Sunday in October at 2:00am.
OCT dstStartByWeek	1.3.6.1.4.1.41010.1.7.9	OCTET STRING	read-write	Start time of summer time. Format: m.w.d.h This specifies day d of week w of month m. The day d must be between 0 (Sunday) and 6. The week w must be between 1 and 5; week 1 is the first week in which day d occurs, and week 5 specifies the last d day in the month. The month m should be between 1 and 12. Default setting is that summer time begins on the first Sunday in April at 2:00am.
INT dtmfType	1.3.6.1.4.1.41010.1.5.1.1.22	INTEGER	read-write
INT echoCancel	1.3.6.1.4.1.41010.1.5.1.1.21	INTEGER	read-write
OCT enctryptType	1.3.6.1.4.1.41010.1.10.3.1.1.1.4	OCTET STRING	read-only	DBID_WIFI_ENCTRYPT_TYPE.
I32 factoryDefault	1.3.6.1.4.1.41010.1.7.3	Integer32	read-write	1:factory reset. Return 0 after factory reset finish.
firmware	1.3.6.1.4.1.41010.1.8
OCT firmwareVersion	1.3.6.1.4.1.41010.1.1.5	OCTET STRING	read-only
OCT flashTimeMax	1.3.6.1.4.1.41010.1.6.1.1.5	OCTET STRING	read-write	unit is second
OCT flashTimeMin	1.3.6.1.4.1.41010.1.6.1.1.6	OCTET STRING	read-write	unit is second
INT fxs1SipAccountStatus	1.3.6.1.4.1.41010.1.1.16	INTEGER	read-only
INT fxs2SipAccountStatus	1.3.6.1.4.1.41010.1.1.17	INTEGER	read-only
INT g723Coding	1.3.6.1.4.1.41010.1.5.1.1.18	INTEGER	read-write
IP gateway	1.3.6.1.4.1.41010.1.2.1.1.14	IpAddress	read-write	static gateway
OCT hardwareVersion	1.3.6.1.4.1.41010.1.1.4	OCTET STRING	read-only
INT impedanceMaching	1.3.6.1.4.1.41010.1.6.1.1.8	INTEGER	read-write
I32 inputGain	1.3.6.1.4.1.41010.1.6.1.1.2	Integer32	read-write	mic gain
INT internetMode	1.3.6.1.4.1.41010.1.2.1.1.7	INTEGER	read-write
OCT internetWanMacAddress	1.3.6.1.4.1.41010.1.1.2	OCTET STRING	read-only
IP ipAddress	1.3.6.1.4.1.41010.1.2.1.1.12	IpAddress	read-write	bind lan port to wan
lan	1.3.6.1.4.1.41010.1.3
IP lanPortIpAddress	1.3.6.1.4.1.41010.1.1.13	IpAddress	read-only
OCT lanPortStatus	1.3.6.1.4.1.41010.1.1.19	OCTET STRING	read-only	10MHalf,10MFull,100MHalf,100MFull,Disconnected
IP lanPortSubnetMask	1.3.6.1.4.1.41010.1.1.14	IpAddress	read-only
INT lineEnable	1.3.6.1.4.1.41010.1.5.1.1.2	INTEGER	read-write
I32 lineIndex	1.3.6.1.4.1.41010.1.1.20.1.1.1	Integer32	read-only
lineStatus	1.3.6.1.4.1.41010.1.1.20
lineStatusEntry	1.3.6.1.4.1.41010.1.1.20.1.1		not-accessible
lineStatusTable	1.3.6.1.4.1.41010.1.1.20.1		not-accessible
IP localIpAddress	1.3.6.1.4.1.41010.1.3.1	IpAddress	read-write
IP localSubnetMask	1.3.6.1.4.1.41010.1.3.2	IpAddress	read-write
I32 loopCurrent	1.3.6.1.4.1.41010.1.6.1.1.7	Integer32	read-write
management	1.3.6.1.4.1.41010.1.7
IP managementPortDefaultGateway	1.3.6.1.4.1.41010.1.1.10	IpAddress	read-only
IP managementPortIpAddress	1.3.6.1.4.1.41010.1.1.8	IpAddress	read-only
IP managementPortPrimaryDns	1.3.6.1.4.1.41010.1.1.11	IpAddress	read-only
IP managementPortSecondaryDns	1.3.6.1.4.1.41010.1.1.12	IpAddress	read-only
IP managementPortSubnetMask	1.3.6.1.4.1.41010.1.1.9	IpAddress	read-only
INT natTraversal	1.3.6.1.4.1.41010.1.4.1	INTEGER	read-write
INT ntpSetting	1.3.6.1.4.1.41010.1.7.4	INTEGER	read-write	time zone
I32 offset	1.3.6.1.4.1.41010.1.7.8	Integer32	read-write	The offset specifies the time value you must add to the local time to get a Coordinated Universal Time value. The hour must be between 0 and 23
I32 operatingmode	1.3.6.1.4.1.41010.1.7.15	Integer32	read-write	1:Basic Mode. 0: Advanced Mode. Return 0 after finish.
I32 outboundPort	1.3.6.1.4.1.41010.1.5.1.1.6	Integer32	read-write
OCT outboundServer	1.3.6.1.4.1.41010.1.5.1.1.5	OCTET STRING	read-write
I32 outputGain	1.3.6.1.4.1.41010.1.6.1.1.3	Integer32	read-write	speaker gain
INT packetCycle	1.3.6.1.4.1.41010.1.5.1.1.19	INTEGER	read-write
OCT passWord	1.3.6.1.4.1.41010.1.7.13	OCTET STRING	read-write
OCT pcLanMacAddress	1.3.6.1.4.1.41010.1.1.3	OCTET STRING	read-only
OCT phoneNumber	1.3.6.1.4.1.41010.1.5.1.1.10	OCTET STRING	read-write
INT portBind	1.3.6.1.4.1.41010.1.2.1.1.11	INTEGER	read-write	bind lan port to wan
preferences	1.3.6.1.4.1.41010.1.6
preferencesEntry	1.3.6.1.4.1.41010.1.6.1.1		not-accessible
preferencesTable	1.3.6.1.4.1.41010.1.6.1		not-accessible
I32 prefLineIndex	1.3.6.1.4.1.41010.1.6.1.1.1	Integer32	read-only	line number.
IP primaryDNS	1.3.6.1.4.1.41010.1.2.1.1.9	IpAddress	read-write
OCT primaryNtpServer	1.3.6.1.4.1.41010.1.7.5	OCTET STRING	read-write
OCT productName	1.3.6.1.4.1.41010.1.1.1	OCTET STRING	read-only
I32 proxyPort	1.3.6.1.4.1.41010.1.5.1.1.4	Integer32	read-write
OCT proxyServer	1.3.6.1.4.1.41010.1.5.1.1.3	OCTET STRING	read-write
OCT pskPasswd	1.3.6.1.4.1.41010.1.10.2.1.1.1.8	OCTET STRING	read-write	pskPasswd.
INT radioOnOff	1.3.6.1.4.1.41010.1.10.2.1.1.1.2	INTEGER	read-write	wlan_2g on\off
OCT readCommunityName	1.3.6.1.4.1.41010.1.9.2	OCTET STRING	read-write
I32 reboot	1.3.6.1.4.1.41010.1.7.2	Integer32	read-write	1:reboot. Return 0 after reboot.
I32 registerRefreshInterval	1.3.6.1.4.1.41010.1.5.1.1.23	Integer32	read-write	unit is seconds.
repeater	1.3.6.1.4.1.41010.1.10.3
I32 resyncProvision	1.3.6.1.4.1.41010.1.7.14	Integer32	read-write	1:Synchronous provision. Return 0 after Synchronous provision finish.
I32 rtpQos	1.3.6.1.4.1.41010.1.4.5	Integer32	read-write
I32 save	1.3.6.1.4.1.41010.1.7.1	Integer32	read-write	1:save. Return 0 after saving.
IP secondaryDNS	1.3.6.1.4.1.41010.1.2.1.1.10	IpAddress	read-write
OCT secondaryNtpServer	1.3.6.1.4.1.41010.1.7.6	OCTET STRING	read-write
OCT serialNumber	1.3.6.1.4.1.41010.1.1.6	OCTET STRING	read-only
INT service	1.3.6.1.4.1.41010.1.2.1.1.5	INTEGER	read-write
INT silenceSupp	1.3.6.1.4.1.41010.1.5.1.1.20	INTEGER	read-write	VAD/CNG
sip	1.3.6.1.4.1.41010.1.4
OCT sipAccount	1.3.6.1.4.1.41010.1.5.1.1.11	OCTET STRING	read-write
I32 sipLineIndex	1.3.6.1.4.1.41010.1.5.1.1.1	Integer32	read-only
INT sipLineStatus	1.3.6.1.4.1.41010.1.1.20.1.1.2	INTEGER	read-only
OCT sipPassword	1.3.6.1.4.1.41010.1.5.1.1.12	OCTET STRING	read-write
I32 sipQos	1.3.6.1.4.1.41010.1.4.4	Integer32	read-write
sipUaEntry	1.3.6.1.4.1.41010.1.5.1.1		not-accessible
sipUaTable	1.3.6.1.4.1.41010.1.5.1		not-accessible
snmp	1.3.6.1.4.1.41010.1.9
ssid	1.3.6.1.4.1.41010.1.10.2
ssid_2g	1.3.6.1.4.1.41010.1.10.2.1
ssid_2gEntry	1.3.6.1.4.1.41010.1.10.2.1.1.1		not-accessible
OCT ssid_2gName	1.3.6.1.4.1.41010.1.10.2.1.1.1.6	OCTET STRING	read-write	ssid_2gname.
ssid_2gTable	1.3.6.1.4.1.41010.1.10.2.1.1		not-accessible
ssid_5g	1.3.6.1.4.1.41010.1.10.2.2
ssid_5gEntry	1.3.6.1.4.1.41010.1.10.2.2.1.1		not-accessible
OCT ssid_5gName	1.3.6.1.4.1.41010.1.10.2.2.1.1.6	OCTET STRING	read-write	ssid_5gname.
ssid_5gTable	1.3.6.1.4.1.41010.1.10.2.2.1		not-accessible
INT ssid2gLineIndex	1.3.6.1.4.1.41010.1.10.2.1.1.1.1	INTEGER	read-only	MIB index number.
OCT ssid5gAuthMode	1.3.6.1.4.1.41010.1.10.2.2.1.1.7	OCTET STRING	read-write	ssid_5g connect AuthMode.
INT ssid5gAutoChannel	1.3.6.1.4.1.41010.1.10.2.2.1.1.5	INTEGER	read-write
INT ssid5gBandwidth	1.3.6.1.4.1.41010.1.10.2.2.1.1.14	INTEGER	read-write	Channel Bandwidth .0:20,1:20/40
INT ssid5gChannel	1.3.6.1.4.1.41010.1.10.2.2.1.1.4	INTEGER	read-write
INT ssid5gDefaultKey	1.3.6.1.4.1.41010.1.10.2.2.1.1.9	INTEGER	read-write	ssid_5g default wepkey.
INT ssid5gLineIndex	1.3.6.1.4.1.41010.1.10.2.2.1.1.1	INTEGER	read-only	MIB index number.
OCT ssid5gPskPasswd	1.3.6.1.4.1.41010.1.10.2.2.1.1.8	OCTET STRING	read-write	ssid5gPskPasswd.
INT ssid5gRadioOnOff	1.3.6.1.4.1.41010.1.10.2.2.1.1.2	INTEGER	read-write	wlan_5g on\off
OCT ssid5gWepkey1	1.3.6.1.4.1.41010.1.10.2.2.1.1.10	OCTET STRING	read-write	ssid_5g wepKey4.
OCT ssid5gWepkey2	1.3.6.1.4.1.41010.1.10.2.2.1.1.11	OCTET STRING	read-write	ssid_5g ssid5gWepkey4.
OCT ssid5gWepkey3	1.3.6.1.4.1.41010.1.10.2.2.1.1.12	OCTET STRING	read-write	ssid_5g ssid5gWepkey4.
OCT ssid5gWepkey4	1.3.6.1.4.1.41010.1.10.2.2.1.1.13	OCTET STRING	read-write	ssid_5g ssid5gWepkey4.
OCT ssid5gWlanMode	1.3.6.1.4.1.41010.1.10.2.2.1.1.3	OCTET STRING	read-only
status	1.3.6.1.4.1.41010.1.1
OCT stunServerAddress	1.3.6.1.4.1.41010.1.4.2	OCTET STRING	read-write
I32 stunServerPort	1.3.6.1.4.1.41010.1.4.3	Integer32	read-write
IP subnetMask	1.3.6.1.4.1.41010.1.2.1.1.13	IpAddress	read-write	static ip mask
OCT systemCurrentTime	1.3.6.1.4.1.41010.1.1.15	OCTET STRING	read-only
INT toneType	1.3.6.1.4.1.41010.1.6.1.1.4	INTEGER	read-write
OCT trapCommunity	1.3.6.1.4.1.41010.1.9.4	OCTET STRING	read-write
I32 trapPeriodInterval	1.3.6.1.4.1.41010.1.9.5	Integer32	read-write	interval of keep alive trap
OCT trapServerAddress	1.3.6.1.4.1.41010.1.9.1	OCTET STRING	read-write	trap address
INT upgradeSet	1.3.6.1.4.1.41010.1.8.2	INTEGER	read-write	1: start upgrade. After upgrade, it will return 0.
INT upgradeStatus	1.3.6.1.4.1.41010.1.8.3	INTEGER	read-only
OCT upgradeUrl	1.3.6.1.4.1.41010.1.8.1	OCTET STRING	read-write	For example: http://url/firmware.bin. Ftp and Tftp are supported also.
OCT userName	1.3.6.1.4.1.41010.1.7.12	OCTET STRING	read-write
INT userType	1.3.6.1.4.1.41010.1.7.11	INTEGER	read-write	admin: high level. basic: middle level. normal: low level.
INT vhtbandwidth	1.3.6.1.4.1.41010.1.10.2.2.1.1.15	INTEGER	read-write	Channel VHT Bandwidth .0:20/40,1:80
I32 vlanId	1.3.6.1.4.1.41010.1.2.1.1.2	Integer32	read-write
I32 vlanPri	1.3.6.1.4.1.41010.1.2.1.1.3	Integer32	read-write
INT vlanTag	1.3.6.1.4.1.41010.1.2.1.1.6	INTEGER	read-write
wan	1.3.6.1.4.1.41010.1.2
wanEntry	1.3.6.1.4.1.41010.1.2.1.1		not-accessible
I32 wanIndex	1.3.6.1.4.1.41010.1.2.1.1.1	Integer32	read-only	max vlan number is 16
OCT wanPortStatus	1.3.6.1.4.1.41010.1.1.18	OCTET STRING	read-only	10MHalf,10MFull,100MHalf,100MFull,Disconnected
wanTable	1.3.6.1.4.1.41010.1.2.1		not-accessible
OCT wepKey1	1.3.6.1.4.1.41010.1.10.2.1.1.1.10	OCTET STRING	read-write	ssid_2g wepKey1.
OCT wepKey2	1.3.6.1.4.1.41010.1.10.2.1.1.1.11	OCTET STRING	read-write	ssid_2g wepkey2.
OCT wepKey3	1.3.6.1.4.1.41010.1.10.2.1.1.1.12	OCTET STRING	read-write	ssid_2g wepkey3.
OCT wepKey4	1.3.6.1.4.1.41010.1.10.2.1.1.1.13	OCTET STRING	read-write	ssid_2g wepkey4.
wifi_2g	1.3.6.1.4.1.41010.1.10.3.1
wifi_2gEntry	1.3.6.1.4.1.41010.1.10.3.1.1.1		not-accessible
wifi_2gTable	1.3.6.1.4.1.41010.1.10.3.1.1		not-accessible
OCT wifi2gAuthMode	1.3.6.1.4.1.41010.1.10.3.1.1.1.3	OCTET STRING	read-only	DBID_WIFI_AUTH_MODE.
INT wifi2gDefaultKey	1.3.6.1.4.1.41010.1.10.3.1.1.1.6	INTEGER	read-write	WIFI_OPEN_WEP_DEFAULT_KEY
INT wifi2gLineIndex	1.3.6.1.4.1.41010.1.10.3.1.1.1.1	INTEGER	read-only	MIB index number.
OCT wifiIPaddr	1.3.6.1.4.1.41010.1.10.3.1.1.1.12	OCTET STRING	read-only	IP address
INT wifiIPmode	1.3.6.1.4.1.41010.1.10.3.1.1.1.11	INTEGER	read-write	IP Mode
wlan	1.3.6.1.4.1.41010.1.10
OCT wlanMode	1.3.6.1.4.1.41010.1.10.2.1.1.1.3	OCTET STRING	read-only
OCT writeCommunityName	1.3.6.1.4.1.41010.1.9.3	OCTET STRING	read-write

RFC description

Cambium wireless networking device management including status, MAC addresses, hardware and firmware versions.

Start monitoring Cambium Networks wireless broadband radios (PMP/PTP) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CAMBIUM-MIB

What Is CAMBIUM-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description