All MIBs › CAMBIUM-MIB › loopCurrent
loopCurrent
Module: CAMBIUM-MIB
OID (symbolic): CAMBIUM-MIB::loopCurrent
OID (numeric): 1.3.6.1.4.1.41010.1.6.1.1.7
Node type: OBJECT-TYPE
Type: Integer32
Access: read-write
What is loopCurrent?
The loop current, in milliamps (20-41), supplied to the analog phone line to power the connected handset. Adjust it if a phone on a long cable run isn't getting enough current to ring or stay off-hook reliably.
Examples
Walk all instances (SNMPv2c):
snmpwalk -v2c -c public <target> 1.3.6.1.4.1.41010.1.6.1.1.7 snmpwalk -v2c -c public <target> CAMBIUM-MIB::loopCurrent
Get a specific instance (index 1):
snmpget -v2c -c public <target> 1.3.6.1.4.1.41010.1.6.1.1.7.1 snmpget -v2c -c public <target> CAMBIUM-MIB::loopCurrent.1
Set instance 1 (SNMPv2c):
snmpset -v2c -c private <target> 1.3.6.1.4.1.41010.1.6.1.1.7.1 i <value>
Start monitoring Cambium Networks wireless broadband radios (PMP/PTP) with a free 30-day trial of IPNetwork Monitor. Create custom SNMP monitor using the CAMBIUM-MIB::loopCurrent OID value, configure state conditions and alerts, and monitor any Cambium Networks wireless broadband radios (PMP/PTP) from a single console.
OID Breakdown
Upper-level ancestors (6 from the standard OID tree / other modules)
| Numeric OID | Name | Module |
|---|---|---|
| 1 | iso | LANART-AGENT |
| 1.3 | org | AirPair-MIB |
| 1.3.6 | dod | AirPair-MIB |
| 1.3.6.1 | internet | AirPair-MIB |
| 1.3.6.1.4 | private | AirPair-MIB |
| 1.3.6.1.4.1 | enterprises | AirPair-MIB |
| Numeric OID | Name | Module |
|---|---|---|
| 1.3.6.1.4.1.41010 | cambiumnetwork | CAMBIUM-MIB |
| 1.3.6.1.4.1.41010.1 | ata | CAMBIUM-MIB |
| 1.3.6.1.4.1.41010.1.6 | preferences | CAMBIUM-MIB |
| 1.3.6.1.4.1.41010.1.6.1 | preferencesTable | CAMBIUM-MIB |
| 1.3.6.1.4.1.41010.1.6.1.1 | preferencesEntry | CAMBIUM-MIB |
| 1.3.6.1.4.1.41010.1.6.1.1.7 | loopCurrent | CAMBIUM-MIB |