CADANT-SHOWCM-FORMAT-MIB

All MIBs › CADANT-SHOWCM-FORMAT-MIB

Organization: Cadant Inc.

Last Updated: 2015-09-21

Category: DOCSIS and Cable, Vendor: ARRIS

Description: Defines data formats for cable modem status display and reporting on ARRIS/Cadant CMTS equipment.

Start monitoring vendor-neutral, standards-based MIB, any SNMPv3-capable network device (SNMP engine identity/boot/clock status) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

What Is CADANT-SHOWCM-FORMAT-MIB?

CADANT-SHOWCM-FORMAT-MIB is a vendor-specific MIB from Cadant/ARRIS that defines configurable output formats for the CMTS's "show cable modem" CLI command, allowing operators to customize which columns of cable modem data are displayed and in what order. It exposes configuration data only -- a table of named format profiles, each specifying up to eight display columns -- rather than any runtime hardware or performance metrics itself. In monitoring terms this MIB does not directly report device health; instead it configures how cable-modem status information (populated elsewhere on the CMTS, e.g. by CADANT-CMTS-EQUIPMENT-MIB or CableLabs' DOCS-IF-MIB-derived data) is presented when queried through the CLI, so its role is administrative/cosmetic rather than diagnostic. It is dependent on the underlying CMTS cable-modem status data sources that populate the columns it defines. It would typically be deployed on Arris/Cadant E6 CMTS chassis by operators who want customized CLI reporting views for cable modem fleets. Engineers can download the CADANT-SHOWCM-FORMAT-MIB file directly to load it into their MIB browser.

IPNetwork Monitor allows you to monitor SNMP objects defined in CADANT-SHOWCM-FORMAT-MIB. Use the built-in SNMP Monitoring Browser to explore available variables, view their current values and descriptions, and select the objects you want to monitor. You can then create SNMP monitors, configure thresholds, and receive alerts when monitored values change.

Supported Devices

Arris/Cadant E6 CMTS chassis

Monitoring Examples

An administrator would poll cadShowCmFormatTable/cadShowCmFormatEntry to see which named format profiles exist (cadShowCmFormatName) and which data columns (cadShowCmFormatCol1 through cadShowCmFormatCol8) each profile displays when the show cable modem command is run. This is purely a display-configuration check -- for instance confirming a custom format includes a signal-quality column -- rather than a source of cable modem health data itself. There is no runtime fault or performance telemetry exposed by this module.

What Can Be Monitored

configured display format names
configured display columns per format profile

Imported Objects

From CADANT-PRODUCTS-MIB

cadExperimental

OBJECT-IDENTITY

From SNMPv2-SMI

MODULE-IDENTITY
OBJECT-TYPE

From SNMPv2-TC

DisplayString
RowStatus
TEXTUAL-CONVENTION

OIDs

OID symbolic	OID numeric	Type	Access	Description
cadShowCmFormatMib	1.3.6.1.4.1.4998.1.1.100.20			This MIB contains definitions for modifying the output of the show cable modem CLI command
cadShowCmFormatTable	1.3.6.1.4.1.4998.1.1.100.20.1		not-accessible	This table contains formatting information for the show cable modem format CLI command.
cadShowCmFormatEntry	1.3.6.1.4.1.4998.1.1.100.20.1.1		not-accessible	Each entry contains a format name along with all of the columns that should be displayed when that format name is used via show cable modem format . cadShowCmFormatCol1 must be set to a valid, non-empty when creating a row. Also, should more column names be specified, they must be specified in increasing order, with no gaps betweens the columns set. That is, if N column names are to be specified, then all columns from cadShowCmFormatCol1 to cadShowCmFormatCol[N] must be specified.
STR cadShowCmFormatName	1.3.6.1.4.1.4998.1.1.100.20.1.1.1	DisplayString	not-accessible	This is the name of the format. It is used as format_name in the CLI commands 'show cable modem format ' and 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol1	1.3.6.1.4.1.4998.1.1.100.20.1.1.2	ShowCmFormatColumnName	read-create	This is the name of the 1st column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol2	1.3.6.1.4.1.4998.1.1.100.20.1.1.3	ShowCmFormatColumnName	read-create	This is the name of the 2nd column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol3	1.3.6.1.4.1.4998.1.1.100.20.1.1.4	ShowCmFormatColumnName	read-create	This is the name of the 3rd column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol4	1.3.6.1.4.1.4998.1.1.100.20.1.1.5	ShowCmFormatColumnName	read-create	This is the name of the 4th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol5	1.3.6.1.4.1.4998.1.1.100.20.1.1.6	ShowCmFormatColumnName	read-create	This is the name of the 5th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol6	1.3.6.1.4.1.4998.1.1.100.20.1.1.7	ShowCmFormatColumnName	read-create	This is the name of the 6th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol7	1.3.6.1.4.1.4998.1.1.100.20.1.1.8	ShowCmFormatColumnName	read-create	This is the name of the 7th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol8	1.3.6.1.4.1.4998.1.1.100.20.1.1.9	ShowCmFormatColumnName	read-create	This is the name of the 8th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol9	1.3.6.1.4.1.4998.1.1.100.20.1.1.10	ShowCmFormatColumnName	read-create	This is the name of the 9th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol10	1.3.6.1.4.1.4998.1.1.100.20.1.1.11	ShowCmFormatColumnName	read-create	This is the name of the 10th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol11	1.3.6.1.4.1.4998.1.1.100.20.1.1.12	ShowCmFormatColumnName	read-create	This is the name of the 11th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol12	1.3.6.1.4.1.4998.1.1.100.20.1.1.13	ShowCmFormatColumnName	read-create	This is the name of the 12th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol13	1.3.6.1.4.1.4998.1.1.100.20.1.1.14	ShowCmFormatColumnName	read-create	This is the name of the 13th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol14	1.3.6.1.4.1.4998.1.1.100.20.1.1.15	ShowCmFormatColumnName	read-create	This is the name of the 14th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol15	1.3.6.1.4.1.4998.1.1.100.20.1.1.16	ShowCmFormatColumnName	read-create	This is the name of the 15th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol16	1.3.6.1.4.1.4998.1.1.100.20.1.1.17	ShowCmFormatColumnName	read-create	This is the name of the 16th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol17	1.3.6.1.4.1.4998.1.1.100.20.1.1.18	ShowCmFormatColumnName	read-create	This is the name of the 17th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol18	1.3.6.1.4.1.4998.1.1.100.20.1.1.19	ShowCmFormatColumnName	read-create	This is the name of the 18th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol19	1.3.6.1.4.1.4998.1.1.100.20.1.1.20	ShowCmFormatColumnName	read-create	This is the name of the 19th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol20	1.3.6.1.4.1.4998.1.1.100.20.1.1.21	ShowCmFormatColumnName	read-create	This is the name of the 20th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol21	1.3.6.1.4.1.4998.1.1.100.20.1.1.22	ShowCmFormatColumnName	read-create	This is the name of the 21st column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol22	1.3.6.1.4.1.4998.1.1.100.20.1.1.23	ShowCmFormatColumnName	read-create	This is the name of the 22nd column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol23	1.3.6.1.4.1.4998.1.1.100.20.1.1.24	ShowCmFormatColumnName	read-create	This is the name of the 23rd column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol24	1.3.6.1.4.1.4998.1.1.100.20.1.1.25	ShowCmFormatColumnName	read-create	This is the name of the 24th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol25	1.3.6.1.4.1.4998.1.1.100.20.1.1.26	ShowCmFormatColumnName	read-create	This is the name of the 25th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol26	1.3.6.1.4.1.4998.1.1.100.20.1.1.27	ShowCmFormatColumnName	read-create	This is the name of the 26th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol27	1.3.6.1.4.1.4998.1.1.100.20.1.1.28	ShowCmFormatColumnName	read-create	This is the name of the 27th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol28	1.3.6.1.4.1.4998.1.1.100.20.1.1.29	ShowCmFormatColumnName	read-create	This is the name of the 28th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol29	1.3.6.1.4.1.4998.1.1.100.20.1.1.30	ShowCmFormatColumnName	read-create	This is the name of the 29th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol30	1.3.6.1.4.1.4998.1.1.100.20.1.1.31	ShowCmFormatColumnName	read-create	This is the name of the 30th column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol31	1.3.6.1.4.1.4998.1.1.100.20.1.1.32	ShowCmFormatColumnName	read-create	This is the name of the 31st column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
SHO cadShowCmFormatCol32	1.3.6.1.4.1.4998.1.1.100.20.1.1.33	ShowCmFormatColumnName	read-create	This is the name of the 32nd column in the CLI command 'configure cable modem format [col_2] ... [col_N]'
INT cadShowCmFormatMultiRows	1.3.6.1.4.1.4998.1.1.100.20.1.1.34	INTEGER	read-create	This is set if we desire multiple rows for each CM. Currently the only condition available id for multiple uchan.
ROW cadShowCmFormatRowStatus	1.3.6.1.4.1.4998.1.1.100.20.1.1.80	RowStatus	read-create	Control object for this row.

RFC description

Cadant Inc. experimental MIB for modifying cable modem CLI output format and display columns in DOCSIS systems (vendor-private).

Start monitoring ARRIS/Cadant C4/E6000 CMTS (cable modem termination system) with a free 30-day trial of IPNetwork Monitor. Import MIBs, browse SNMP OIDs, create custom SNMP monitors, configure alerts, and monitor any SNMP-enabled network device from a single console.

Download CADANT-SHOWCM-FORMAT-MIB

What Is CADANT-SHOWCM-FORMAT-MIB?

Supported Devices

Monitoring Examples

What Can Be Monitored

This MIB depends on

Related MIBs

RFC description